Alpha E-Tec Combi Review 2026: E-Tec NX vs E-Tec Plus NX
Hertfordshire, Bedfordshire & Cambridgeshire
The Alpha E-Tec is a compact, well-built combi boiler that suits most flats and small to medium homes with one bathroom, and in 2026 it comes in two versions: the E-Tec NX with a 7 year warranty and the premium E-Tec Plus NX with 10 years as standard, rising to 13 years with Alpha’s PremierPack Pro. Both use a stainless steel heat exchanger, a variable speed pump and modern controls, and the Plus comes in 28, 33 and 38 outputs for homes that need more hot water.
In short
- Two versions: E-Tec NX (7 year warranty) and E-Tec Plus NX (10 years standard, 11 with the Cyclone Plus NX filter, 13 with PremierPack Pro).
- E-Tec Plus NX outputs: 28, 33 and 38, with Alpha quoting hot water flow rates of 12.1, 14.1 and 15.4 litres a minute.
- Stainless steel heat exchanger moulded in thermoplastic, Grundfos variable speed pump, weather compensation and OpenTherm compatible.
- A good fit for one bathroom. For two bathrooms used at once, look at the larger outputs or a system boiler with a cylinder.
- Check flow rates on a like-for-like basis, because brands quote them at different temperature rises.
Alpha E-Tec at a glance
| E-Tec NX | E-Tec Plus NX | |
|---|---|---|
| Type | Combi | Combi |
| Heat exchanger | Stainless steel in a thermoplastic housing | Stainless steel |
| Pump | Grundfos hydroblock, Delta T variable speed | Delta T variable speed |
| Controls | OpenTherm and Alpha BUS | OpenTherm and Alpha BUS, larger LCD with touch buttons |
| Weather compensation | Compatible with an external sensor | Compatible |
| Filling loop | Check the model spec | Integrated |
| Standard warranty | 7 years | 10 years |
| Extended warranty | Ask your installer | 11 years with Cyclone Plus NX filter, 13 with PremierPack Pro |
Both versions share the same basic engineering. The Plus adds the longer warranty, a larger touch-button display and more output options, and Alpha describes it as Good Homes approved. If you are replacing an old boiler, our boiler installation survey checks which size and type genuinely suits your home before you settle on a model.
E-Tec Plus NX specifications
These figures are from Alpha’s product information for the E-Tec Plus NX.
| 28 | 33 | 38 | |
|---|---|---|---|
| Hot water output | 28.0kW | 32.0kW | 36.9kW |
| Central heating output | 26.1kW | 30.4kW | 34.8kW |
| Hot water flow rate | 12.1 litres a minute | 14.1 litres a minute | 15.4 litres a minute |
| Weight | 31.2kg | 33.4kg | 33.4kg |
| Size (height x width x depth) | 712 x 440 x 268mm | 712 x 440 x 268mm | 712 x 440 x 268mm |
The E-Tec NX 28 has the same hot water output (28kW), central heating output (26.1kW) and flow rate (12.1 litres a minute) as the Plus 28, with an A ErP rating for heating.
A note on flow rates
Combi flow rates are quoted at a set temperature rise, the difference between the cold mains and the hot water at the tap. The E-Tec 28 flow rate is published at a 35°C rise. Some other manufacturers publish theirs at a 40°C rise, which gives a lower number for the same power. When comparing boilers, compare at the same rise, and remember that the real flow at your taps also depends on your mains pressure and flow.
Features explained
Stainless steel heat exchanger
Alpha moulds the stainless steel heat exchanger into a thermoplastic housing, which keeps weight down and resists corrosion. A clean system, correct inhibitor and a magnetic filter are still essential to protect it.
Variable speed pump
The Grundfos pump adjusts its speed to keep the right temperature difference between flow and return. That helps the boiler condense more of the time, which is where a condensing boiler is most efficient, and it can be quieter than a fixed speed pump.
Flow temperature and weather compensation
You can turn the heating flow temperature down, and an outside sensor can be added so the boiler automatically runs cooler in mild weather. Lower flow temperatures make a real difference to efficiency in homes where the radiators are big enough.
Controls
The E-Tec works with OpenTherm controls and Alpha’s own Alpha BUS range, including the Alpha Touch Wi-Fi thermostat. OpenTherm lets a compatible thermostat vary the boiler’s output rather than just switching it on and off.
Installation details
A removable push-fit flue connection for vertical or horizontal flues and a combined expansion relief and condensate drain make for a neater installation. The Plus also has an integrated filling loop.
Pros and cons
| Pros | Cons |
|---|---|
| Long standard warranty on the Plus | E-Tec NX warranty is shorter than the Plus |
| Stainless steel heat exchanger | Alpha has a smaller engineer network than the biggest brands |
| Weather compensation and OpenTherm compatible | Longest warranties depend on accessories and servicing |
| Compact at 712mm high and 440mm wide (Plus) | Like any combi, hot water is limited when two outlets run at once |
| Three outputs on the Plus to suit different homes | Compare flow rates carefully across brands |
Which homes suit the Alpha E-Tec
- Flats and one-bathroom homes. The 28 is the natural choice where one shower or bath runs at a time.
- Larger homes with a busy bathroom and en suite. The 33 or 38 Plus give more hot water, but no combi can run two powerful showers at full flow. If that is how you live, a system boiler with a hot water cylinder may suit you better.
- Homes with low mains flow. A bigger combi will not help if the mains cannot supply the water. Your installer should measure it during the survey.
Our guide to the best combi boilers compares the E-Tec with other popular models.
Before you choose
- Size it to your home. Match the output to your hot water demand and heat loss, not the old boiler’s number.
- Check the gas supply. Larger combis need an adequately sized gas pipe.
- Plan the condensate route. Internal routes are best. External pipes need insulating so they do not freeze.
- Clean the system and fit a filter. A flush and a magnetic filter protect the heat exchanger and any warranty.
- Register the warranty and book the service. Warranties depend on registration and annual servicing.
Our guide on how to choose a boiler installer in Hertfordshire lists the questions worth asking.
How we price it
Installations are quoted as a fixed price after a free survey, so the price you agree is the price you pay. You can get your price online in a couple of minutes with our boiler quote tool. New boiler packages include a magnetic system filter, the first year’s service and removal of the old boiler, and our installation labour carries a 12 month guarantee.
We are Ideal Max accredited installers and Vaillant myREWARDS installers, and we are happy to compare an Alpha E-Tec honestly with the models we fit. If you already have an E-Tec, we repair and service Alpha along with all the major brands. Repair visits have no call-out fee in normal working hours, and every rate is on our prices page.
Frequently asked questions
Is the Alpha E-Tec a good boiler?
Yes. It is a well-engineered combi with a stainless steel heat exchanger, variable speed pump and modern controls. Like any boiler, how well it performs over the years depends on correct sizing, a clean system and annual servicing.
What is the difference between the E-Tec NX and E-Tec Plus NX?
The Plus has a longer standard warranty (10 years against 7), a larger touch-button display and a choice of 28, 33 and 38 outputs. The core engineering, heat exchanger and pump are similar.
Who makes the Alpha E-Tec?
Alpha Heating Innovation, the trading name of Alpha Therm Ltd, based in Kent. Alpha is part of the Italian Immergas Group.
How much hot water does an Alpha E-Tec give?
Alpha quotes 12.1 litres a minute for the 28, 14.1 for the Plus 33 and 15.4 for the Plus 38. The 28 figure is published at a 35°C temperature rise. What you get at the tap also depends on your mains water pressure and flow.
Does the Alpha E-Tec work with smart thermostats?
Yes. It is compatible with OpenTherm controls and Alpha’s own Alpha BUS controls, including the Alpha Touch Wi-Fi thermostat. Check any third-party smart thermostat is OpenTherm compatible if you want it to modulate the boiler.
Boiler installation across Hertfordshire, Bedfordshire and Cambridgeshire
If you are weighing up an Alpha E-Tec or another combi, we will survey your home, measure your water flow and recommend the right size. See our boiler installation page or call 01462 506374. The phone is answered 24 hours a day, 7 days a week.
What our customers say
Speak to a local engineer
Vantage Plumbing and Heating covers Hertfordshire, Bedfordshire and the surrounding areas. Call and talk to an engineer, or send us the details and we will come back to you with a price.
Gas Safe registered, number 956889. Emergency line answered 24/7.
Boiler engineers near you
Boiler playing up? Book a local Gas Safe engineer
We cover Hertfordshire, Bedfordshire and Cambridgeshire. Choose your town:
Not listed? See all the areas we cover or call 01462 506 374