Bathroom Installations in Hertfordshire, Bedfordshire & Cambridgeshire
The difference between a bathroom installation that lasts fifteen years and one that starts causing problems in year three is almost entirely down to the installation itself, how carefully the room was surveyed, how properly the waste routing was planned, how well the substrate was prepared, and how thoroughly each stage was checked before the next covered it up.
Vantage designs and fits bathrooms across Hertfordshire, with one project lead responsible for coordinating the plumbing, tiling and Part P qualified electrical work from the first survey through to final handover. Every installation starts with a proper on-site survey, an itemised quotation, and a written specification you can compare fairly against anyone else’s.
Our Bathroom Installations Process & Services
Bathroom Design and Installation
Every project starts on-site, not on a computer. We measure the room properly, note the soil-stack position, check water pressure, inspect the visible pipework and confirm the electrical layout before any design work begins. That order matters, a lovely-looking layout that assumes waste routing the property doesn’t actually support becomes an expensive mid-project rework.
Bespoke Luxury Bathrooms
For higher-end projects, we work regularly with Villeroy & Boch, Duravit, Hansgrohe, Crosswater and other premium brands. Bespoke luxury bathrooms genuinely worth the specification aren’t just about the products on the wall, they’re about the detail that supports those products invisibly. A wall-hung vanity needs a properly reinforced wall behind it, not just a stud fixing that will eventually work loose. A concealed cistern needs a proper service panel so future maintenance doesn’t mean cutting through tiles. Large-format porcelain needs an absolutely flat substrate; a 1mm variation over 600mm shows as lippage. Freestanding baths need waste connections that stay accessible once the floor is finished.
Full Bathroom Fit-Outs
A full installation is a proper strip-out and fit-out. Everything comes out, old suite, tiles, floor coverings, decayed pipework, boxing that’s outlived its purpose, and what goes back is fitted to suit the current household, not whoever specified the room years ago. A typical family bathroom installation takes 7-12 working days on site. A full strip-out and re-fit runs 10-14 days. Wet rooms with proper tanking and drainage falls sit around 10-14 days. Premium master bathroom installations with bespoke fittings can reach 12-18 days. We handle disposal, protection of the surrounding property, and daily project coordination.
Bathroom Plumbing
Fitting a new bathroom is as much about what’s behind the tiles as what’s in front of them. We size the supply pipework to suit the fittings going in, a rainfall shower or twin-ended bath draws more than the old suite was ever designed around, and route the waste connections so the finished room drains properly and stays accessible if it ever needs attention. On older Hertfordshire properties, Victorian and Edwardian terraces across Hitchin, St Albans, Berkhamsted and Hertford, 1930s semis, and post-war housing, that often means dealing with ageing copper, cast iron drainage or pipework that was never routed for the layout going in, before we can fit anything new. Our wider plumbing services cover diagnosis and repair on anything the installation reveals.
Extractor Fan Installation
Extractor fan installation is where too many bathrooms fail after the first two winters. An undersized fan, a duct route that dumps into a loft void rather than to fresh air, or a fan positioned across the room from the shower, any of these leaves humidity in the room long after you’ve finished bathing. Damp grout, warped furniture, peeling paint and mould behind sealants all trace back to inadequate ventilation. We fit humidity-sensing extractors sized for the room volume, ducted on the shortest sensible route to an external wall, with overrun timers and back-draught shutters. Windowless bathrooms get particular attention, a proper mechanical solution rather than a token fan.
Our Recent Projects
Common Problems We Solve
The recurring issues we see traced back to a rushed or poorly sequenced installation:
- Poor pressure on a newly fitted shower, supply pipework sized for the old suite rather than the new fittings
- Silicone failing within months of a fit, waterproofing rushed or skipped to save a day on the programme
- A shower valve that needs the wall opened up to fix, no service panel built in during the first fix
- New basins and baths draining slowly, waste falls not corrected when the old suite came out
- A newly fitted towel rail that never gets properly warm, balancing missed during commissioning
- An extractor that's fitted but doesn't clear steam, wrong size for the room, or ducted the wrong way
Our Installation Process
- Free on-site survey and honest scope discussion
- Itemised quotation with all inclusions and exclusions listed
- Product specification agreed in writing before ordering
- Strip-out, disposal, and protection of surrounding rooms
- First-fix plumbing and electrical, tanking, subfloor preparation
- Wall and floor tiling with proper adhesive and grout systems
- Second-fix, suite, brassware, shower enclosure, radiator or heated towel rail
- Snagging, silicone finishing, electrical certification and handover
Why Choose Vantage Plumbing & Heating
Gas Safe registered (reg. 956889), CHAS accredited, City & Guilds and BPEC qualified trades, and a 2-year labour guarantee on every installation. Every project has one project lead accountable from survey to handover, one team coordinating the work, not separate contractors pointing at each other when something needs attention. Beyond bathroom installations, we handle full heating services when you need work done elsewhere in the property.
Book a Free Bathroom Survey
Call 01462 506 374 or use our contact page to arrange an on-site survey. No obligation, just an honest scope discussion and an itemised quotation.
Trusted & Accredited Professionals
What’s Included in a Full Bathroom Installation
- Full strip-out and disposal of existing bathroom
- First fix plumbing waste runs, supply pipes, drainage
- Full tanking and waterproofing before any tiling begins
- Wall and floor tiling supply or customer-supplied materials
- Sanitaryware fitting bath, basin, toilet, shower enclosure or wet room
- Shower valve and thermostatic controls
- Towel rail and heated rail connections
- Extractor fan installation and ventilation
- Second fix plumbing and final connections
- Full electrical work (in conjunction with our electricians)
- Full clean and handover
Fully Tanked. Fully Waterproofed. Guaranteed.
How Long Does It Take?
Why Choose Vantage?
With a 4.9 Google rating from more than 460 reviews, fully qualified and accredited engineers, transparent pricing, and a 2-year labour guarantee on every job, Vantage delivers reliable, high-quality workmanship you can trust with fast response times, and genuine local service.
- Five-star Google reviews
- Gas Safe Registered No. 956889
- CHAS Registered
- City & Guilds qualified
- Checkatrade approved
- 2 year labour guarantee on every job
- Fully stocked vans most jobs fixed on the first visit
- Established local business with a dedicated office team and multiple qualified engineers
- No job too small
- Transparent pricing with a fixed price provided before any work begins
- 460+ Google reviews with a 4.9 star average
Frequently Asked Questions
How long does a bathroom installation take?
A standard family bathroom typically takes 7-12 working days on site. Full strip-out and rebuild runs 10-14 days. Wet rooms 10-14 days. Premium master bathrooms with bespoke fittings can reach 12-18 days. Quotations include contingency for anything discovered during strip-out on older properties.
Do you supply the bathroom or do I buy it separately?
Both options work. Fitter-supplied gives you one point of accountability if anything fails under warranty. Customer-supplied fine for tiles and mirrors but usually messier on the suite itself. We’re happy either way and quote both scenarios clearly so you can compare properly.
Will the same team handle plumbing, tiling and electrics from start to finish?
Yes, one project lead sequences the plumbing first-fix, tiling and Part P qualified electrical work through to second-fix and testing, so everything goes in in the right order and there’s a single point of contact if anything needs adjusting before handover.
Do I need building regulations approval for a bathroom installation?
Not usually for a straightforward like-for-like replacement. Notifiable electrical work is certified under Part P by the installing electrician as part of the job. Structural alterations, drainage changes or bathrooms in new-build extensions may need building control notification, we identify what applies during the initial survey.