Bathroom Tile Ideas: Styles, Layouts and Choosing the Right Tile
Hertfordshire, Bedfordshire & Cambridgeshire
Good bathroom tile ideas start with the room: large format porcelain for a calm, easy to clean look, small mosaics or textured tiles on shower floors for grip, and one feature wall or floor where you want the eye to go. The right tile then has to suit where it goes, which means porcelain or a floor-rated tile underfoot with enough slip resistance for bare wet feet, a surface that can take the weight, and waterproofing behind every tile in the shower.
In short
- Pick one feature, such as a patterned floor, a shower wall or a vanity wall, and keep the rest simple.
- Large tiles mean fewer grout lines and a calmer look, but they need very flat walls and floors.
- Small tiles and mosaics suit shower floors that fall to a drain and give better grip.
- Porcelain is the most practical all-rounder. Ceramic suits walls. Natural stone needs sealing and care.
- For floors, check slip resistance. The Health and Safety Executive treats a pendulum test value of 36 or more as low slip potential.
- Tiles and grout are not waterproof on their own. Wet areas need tanking underneath.

Bathroom tile ideas worth considering
Large format tiles for a calm, bigger looking room
Large porcelain tiles on walls and floor reduce grout lines, which makes a small bathroom feel bigger and makes cleaning easier. Using the same tile on the floor and up the walls blurs the edges of the room. The catch is preparation. Large tiles show every dip in a wall or floor, so the surface must be flat, and heavy tiles may need a tile backer board rather than plasterboard. Getting that preparation right is most of the work in bathroom tiling.
A feature wall
Use a bold pattern, a colour or a textured tile on one wall only: behind the vanity unit, the back wall of the shower, or behind a freestanding bath. The rest of the room in a plain tile or paint lets the feature stand out.
Patterned floors
Encaustic-look porcelain, geometric designs and terrazzo-effect tiles make a strong statement underfoot and work well with plain walls. They suit period homes and cloakrooms particularly well.
Laying patterns
The same plain tile can look completely different depending on how it is laid.
- Stack bond, with tiles in straight lines, looks modern and clean.
- Brick bond, offset by half a tile, is the classic metro look.
- Vertical stack makes a low ceiling feel taller.
- Herringbone and chevron add movement, usually on a floor or feature wall, and take longer to lay.
Texture and handmade looks
Tiles with a hand-glazed, uneven surface reflect light differently across the wall and add depth, especially in a shower or behind a basin. Fluted and ribbed tiles add texture on a feature wall.
Stone and wood effects
Marble-effect and stone-effect porcelain give the look of natural stone with far less maintenance. Wood-effect porcelain planks bring warmth to a floor and can run through from an adjoining room.
Half-height tiling
Tiling to about half height or to the top of the vanity unit, with bathroom paint above, is a practical, budget-friendly look that suits family bathrooms and cloakrooms.
Coloured grout
A contrasting grout emphasises the pattern of the tile. A matching grout makes the wall read as one surface. Darker grout on floors hides marks better.
Shower niches and trims
A tiled niche set into the wall looks far neater than a shower caddy, and metal or tiled trims finish edges and corners cleanly. Plan niche sizes to match the tile so the cuts line up.
Choosing the right tile material
| Material | Where it works | Strengths | Things to know |
|---|---|---|---|
| Porcelain | Walls, floors, showers, wet rooms | Dense, hard wearing, low water absorption, huge range of looks | Harder to cut, and large tiles are heavy |
| Ceramic | Mainly walls | Lighter, easier to cut, wide choice of colours | Many ceramic tiles are not suitable for floors |
| Natural stone | Walls and floors with care | Unique natural finish | Needs sealing, can stain or etch, heavy |
| Glass and mosaic | Feature areas, niches, shower floors | Colour and detail, small mosaics suit falls to a drain | More grout lines to keep clean |
Always check that a tile is rated for floor use if it is going underfoot. A wall tile on a floor can crack and become slippery.
Slip resistance for bathroom floors
Bathroom floors are walked on with wet, bare feet, so slip resistance matters more than in most rooms. The Health and Safety Executive’s guidance on assessing floors uses the pendulum test value (PTV), and classifies surfaces like this:
- 0 to 24: high slip potential
- 25 to 35: moderate slip potential
- 36 and above: low slip potential
Some tiles are sold with a ramp test rating instead. The HSE notes that surfaces rated in the lowest classes of the barefoot ramp test can still be slippery when wet, so the pendulum value, where the manufacturer gives it for wet conditions, is the more useful figure. As a rule of thumb, highly polished tiles are a poor choice for a bathroom floor, and small mosaics or textured finishes give more grip in a walk-in shower. Our guide on choosing the right tiles for your bathroom floor goes into more detail.
What goes behind and between the tiles
A beautiful tile only lasts if the work underneath is right.
- Flat, strong surfaces. Walls and floors should be flat and rigid. Floors that flex crack tiles and grout.
- The right board. Standard plasterboard has a limit on the weight of tile it can carry, and is not suitable as the base in a shower. Tile backer boards are used in wet areas and for heavy tiles.
- Tanking. Tiles and grout let water through over time. The whole shower area, and the entire floor of a wet room, needs a waterproof membrane before tiling. See our wet rooms page for how the floor is built.
- The right adhesive. Porcelain and large tiles need adhesives made for them, with full coverage behind the tile.
- Grout and silicone. Grout fills the joints, and flexible silicone goes where the tiles meet the bath, tray or a change of direction. Epoxy grouts resist staining and are useful in showers.
- Movement joints. Large areas and floors with underfloor heating need movement joints so the tiles can expand and contract without cracking.
If you are planning underfloor heating, choose a tile and adhesive that are compatible with it. Porcelain and stone both work well.
Common tiling mistakes
- Tiling a shower without tanking behind it.
- Using wall tiles on a floor, or polished tiles in a wet area.
- Laying large tiles on a wall or floor that is not flat, which leaves lipped edges.
- Drilling through tiles over the shower or bath without checking for pipes and cables behind.
- Grouting where silicone should be, around the bath or tray, which cracks as the bath moves.
Tiling a small bathroom
- Use larger tiles, fewer grout lines and a light colour to reflect light.
- Run the same tile from floor to wall to make the room feel bigger.
- Keep to one feature so the room does not feel busy.
- Consider tiling the shower fully and painting other walls.
Refresh or retile?
If your tiles are sound but the grout is stained or cracked, regrouting and resealing may be enough, as our guide on professional tile restoration explains. If tiles are loose, hollow, cracked around the shower or the wall behind feels soft, water is probably getting in, and the wall needs stripping and waterproofing properly before retiling.
How we price it
Tiling is usually priced as part of a wider bathroom renovation. Installations are quoted as a fixed price after a free survey, so the price you agree is the price you pay. The quote will reflect the tile size, pattern and preparation needed, because large format tiles and herringbone take longer than a standard layout. Rates for repairs and smaller jobs are published on our prices page. Every bathroom we install carries a 12 month guarantee.
Frequently asked questions
What tiles are best for a bathroom?
Porcelain is the best all-rounder because it is dense, hard wearing and absorbs very little water, so it works on walls, floors and in showers. Ceramic is a good choice for walls. Natural stone looks beautiful but needs sealing and more care.
Are large tiles good in a small bathroom?
Often, yes. Fewer grout lines make the room look bigger and cleaner. They need very flat walls and floors, and small tiles or mosaics are still better on a shower floor that falls to a drain.
What is the most slip resistant bathroom floor tile?
Look for a tile with a pendulum test value of 36 or more in wet conditions, which the HSE classes as low slip potential. Textured finishes and small mosaics with more grout lines usually give better grip than large polished tiles.
Do bathroom tiles need to be waterproofed?
The tiles and grout themselves are not a waterproof barrier. In showers and wet rooms, a tanking system behind the tiles is what keeps water out of the walls and floor.
Can you tile over existing bathroom tiles?
It is sometimes possible on walls if the existing tiles are firmly bonded and the wall can take the extra weight, but it hides any problem underneath and reduces space. In a shower, stripping back and waterproofing properly is usually the better choice.
Bathroom tiling across Hertfordshire, Bedfordshire and Cambridgeshire
We tile bathrooms, en suites, showers and wet rooms as part of a full renovation, with the preparation and waterproofing done properly underneath. See our bathroom tiling page or call 01462 506374 for a free survey.
What our customers say
Speak to a local engineer
Vantage Plumbing and Heating covers Hertfordshire, Bedfordshire and the surrounding areas. Call and talk to an engineer, or send us the details and we will come back to you with a price.
Gas Safe registered, number 956889. Emergency line answered 24/7.
Bathroom fitters near you
Planning a new bathroom? Our own team designs and fits it
We cover Hertfordshire, Bedfordshire and Cambridgeshire. Choose your town:
Not listed? See all the areas we cover or call 01462 506 374