Skip to main content

Vantage Plumbing and Heating

Best 40kW Combi Boilers 2026: Which Big Combi Is Worth It?

Hertfordshire, Bedfordshire & Cambridgeshire

Fully Stocked Vans12 Month Labour GuaranteeGas Safe Registered 956889

The best 40kW combi boilers in 2026 are the Ideal Vogue Max C40, the Vaillant ecoTEC plus 840 (or the larger 940) and the Worcester Greenstar 8000+ 40kW, with ATAG’s iC 40 another option. A 40kW combi gives around 16 litres a minute of hot water, enough for a strong shower or a bath that fills quickly, but only if your mains water supply can deliver that much, so check your supply before paying for a bigger boiler.

In short

  • A 40kW combi gives roughly 16 litres a minute of hot water at a 35°C rise, against about 12 for a 30kW model.
  • Heating output is lower than the badge: around 30 to 34 kW on these models.
  • Our picks: Ideal Vogue Max C40, Vaillant ecoTEC plus 840 and 940, Worcester Greenstar 8000+ 40kW and ATAG iC 40.
  • You need a strong mains supply, a big enough gas pipe and room for a larger boiler.
  • If two showers often run together, a system boiler and cylinder usually serves you better.
Ideal boiler installed by Vantage in a fitted cupboard, with copper pipework and a magnetic system filter
One of our boiler installations: an Ideal combi in a fitted cupboard with a magnetic system filter.

Who needs a 40kW combi boiler?

A 40kW combi makes sense in a larger home with a bathroom and an en suite, where people want a strong shower and a bath that fills in reasonable time, and where the mains supply is good. It is not a way to run two showers at full flow. At about 16 litres a minute, two showers running at once will share that flow, and both will feel weaker than either would on its own.

It also does not make radiators hotter. On a combi, the kW figure describes the hot water side. The heating output of a 40kW combi is typically in the low 30s, which is plenty for most large homes but rarely the reason to choose one.

If you are not sure whether you need 40kW, a survey will measure your heat loss, your mains flow and pressure, and how your household uses hot water. Our boiler installation page explains how we do it.

The best 40kW combi boilers compared

Figures come from each manufacturer’s published specifications. Worcester Bosch quotes hot water flow at a 40°C rise rather than 35°C, so its figure looks a little lower than it would on the same basis as the others.

BoilerHeating outputHot water flowSize and weightManufacturer warranty
Ideal Vogue Max C405.7 to 32.0 kW16.4 litres a minute at 35°C rise35.4 kg installation weight10 years, or 12 through a Max accredited installer
Vaillant ecoTEC plus 8404.5 to 29.8 kW16.3 litres a minute at 35°C rise720 x 440 x 386 mm, 41 kgUp to 10 years on selected boilers
Vaillant ecoTEC plus 9404.5 to 29.8 kW18.0 litres a minute at 35°C rise720 x 440 x 580 mm, 60 kgUp to 10 years on selected boilers
Worcester Greenstar 8000+ 40kWUp to 33.7 kW15 litres a minute at 40°C rise780 x 440 x 365 mmExtended guarantee through a Worcester accredited installer
ATAG iC 40Check the data sheetCheck the data sheetCheck the data sheet12 years as standard, ATAG says, subject to conditions

It is worth knowing that some well-known brands stop short of 40kW. Baxi’s largest current combi is 36kW, and Viessmann’s Vitodens combis go up to 35kW.

Our picks in detail

Ideal Vogue Max C40: best all-round 40kW combi

The Vogue Max C40 gives 16.4 litres a minute of hot water and up to 32.0 kW of heating, the highest heating output of the 35°C-rated boilers here. Ideal quotes a seasonal heating efficiency of 93% and an A rating for water heating. The standard guarantee is 10 years, extended to 12 years when fitted by an Ideal Max accredited installer and serviced every year. We are Max accredited, so we can offer the full 12 years, and the Vogue Max C40 is the largest combi in our online boiler quote.

Vaillant ecoTEC plus 840: best for steady running

The 840 gives 16.3 litres a minute and heats at up to 29.8 kW, and it can turn down to 4.5 kW, so it runs smoothly on mild days rather than switching on and off. It has a stainless steel heat exchanger, a clear display and good parts support. It is a little deeper than Vaillant’s smaller combis at 386 mm. As a Vaillant myREWARDS installer, we can offer guarantees of up to 10 years on selected Vaillant boilers.

Vaillant ecoTEC plus 940: most hot water from a combi

The 940 is a different kind of boiler. It has a small built-in store of hot water that helps it deliver 18.0 litres a minute, the highest flow in this group. The trade-off is size: it is 580 mm deep and weighs 60 kg dry, so it needs a wall and a space that can take it, and Vaillant lists it as not suitable for LPG. It suits a home that wants combi convenience with a bit more hot water in reserve, where the space allows.

Worcester Greenstar 8000+ 40kW: premium option with high heating output

Worcester’s 40kW 8000+ heats at up to 33.7 kW and gives 15 litres a minute at a 40°C rise. It has a touchscreen display and an automatic refill system that tops up the pressure. The case is 780 x 440 x 365 mm. Worcester’s longest guarantees need a Worcester accredited installer. We are not a Worcester accredited installer, but we repair and service Worcester Bosch boilers.

ATAG iC 40: worth a look

ATAG’s iC combi range includes a 40kW model. ATAG is a smaller brand in the UK. It says its boilers come with a 12 year warranty as standard, with longer options, and that an annual service keeps the warranty valid. Check the data sheet for the exact heating output and flow rate, and ask your installer how parts support works in your area.

What a 40kW combi needs to work properly

A bigger combi asks more of your home. Before choosing one, check these.

  1. Mains flow and pressure. A combi cannot deliver more water than your mains supplies. For a 40kW combi to be worth it, you want the kitchen tap to deliver well over 12 litres a minute. If it does not, a bigger boiler just gives the same flow, hotter. Our guide to low water pressure in the whole house explains what limits a supply.
  2. Gas supply. A 40kW combi burns more gas at full hot water output than a smaller one. The gas pipe from the meter has to be large enough to feed it along with your other gas appliances, and upgrading it is a common part of fitting a larger combi.
  3. Space and weight. Large combis are bigger and heavier. Check the depth of the cupboard and the strength of the wall.
  4. The flue and condensate route. A new, larger boiler may need a new flue position and a properly run condensate pipe.
  5. Pipework to the taps. Long, narrow hot water runs lose flow and waste water while you wait for it to run hot.

When a system boiler is the better choice

If your home regularly runs two showers at once, or has three bathrooms, even the biggest combi will struggle. A system boiler with an unvented cylinder stores a large volume of hot water at mains pressure, so several outlets can run together without a drop in flow. It needs space for the cylinder, but it is often the right answer for larger households. Our unvented cylinders page explains how they work.

Your householdBetter choice
One bathroom plus en suite, one shower at a time, strong mains40kW combi
Two showers often running togetherSystem boiler and unvented cylinder
Weak mains supplySystem boiler with a cylinder, or improve the supply first
Limited space and no room for a cylinderLargest combi the mains can support

Mistakes to avoid

  • Buying on the badge. Compare the flow rate and heating output, and note whether the flow is quoted at a 35°C or 40°C rise.
  • Expecting two full showers. A 40kW combi shares about 16 litres a minute between everything running.
  • Ignoring the gas pipe. An undersized gas supply stops a big combi reaching its output.
  • Skipping the system clean and filter. A large new boiler on a dirty system will not last.
  • Missing the annual service. Every warranty here depends on it. Our best combi boilers guide covers what to look for across all sizes.

How we price it

Installations are quoted as a fixed price after a free survey, so the price you agree is the price you pay. You can get your price online in a couple of minutes with our boiler quote tool. Every new boiler package we fit includes a magnetic system filter, the first year’s service and removal of the old boiler. Repair and service rates are on our prices page.

Frequently asked questions

How many bathrooms can a 40kW combi boiler supply?

A 40kW combi suits a home with a main bathroom and an en suite, provided they are not both in heavy use at once. With three bathrooms, or two showers often running together, a system boiler with a cylinder is usually better.

What is the flow rate of a 40kW combi boiler?

About 16 litres a minute at a 35°C rise. The Ideal Vogue Max C40 is rated at 16.4 and the Vaillant ecoTEC plus 840 at 16.3, as long as the mains supply can deliver that much water.

Is a 40kW combi too big for my house?

It can be. If you have one bathroom or a weak mains supply, a 40kW combi gives little benefit over a 30 to 35kW model. The right size depends on your hot water use and mains supply, not the number of bedrooms.

Do I need a bigger gas pipe for a 40kW combi?

Often, yes. A larger combi needs more gas at full output, and the pipe from the meter must be sized to deliver it along with your other appliances. A Gas Safe engineer checks this during the survey.

Does a 40kW combi cost more to run?

Not for the same use. A boiler burns the gas needed to meet the demand, so filling the same bath takes about the same energy on either size. You may use more hot water simply because it arrives faster.

Boiler installation in Hertfordshire, Bedfordshire and Cambridgeshire

We are Gas Safe registered (956889), rated 4.9 on Google, an Ideal Max accredited installer and a Vaillant myREWARDS installer. To find out whether a 40kW combi or a system boiler suits your home, see our boiler installation page or call 01462 506374.

What our customers say

Speak to a local engineer

Vantage Plumbing and Heating covers Hertfordshire, Bedfordshire and the surrounding areas. Call and talk to an engineer, or send us the details and we will come back to you with a price.

Gas Safe registered, number 956889. Emergency line answered 24/7.

Trusted & Accredited Professionals
Checkatrade approved trader
City and Guilds qualified engineers
BPEC certified engineers
Gas Safe registered engineers
Elite CHAS accreditation
London and South East England Prestige Awards 2022 winner
Veriforce CHAS accredited contractor

Rather have an engineer look at it?

Call the office, message us on WhatsApp or ask for a callback. We cover Hertfordshire, Bedfordshire and the surrounding areas.

Why choose Vantage

Rated 4.9 on Google from more than 700 reviews across Google, Checkatrade and Trustatrader. Qualified, accredited engineers, a fixed price before any work begins and a labour guarantee on every job, from an established local company with an office team you can actually reach. No job too small.

The Vantage Plumbing and Heating fleet of five fully stocked liveried vans

Gas Safe registered

Company registration 956889. Every gas engineer carries their own Gas Safe ID card, and you can ask to see it.

Refcom F-Gas certified

REF1024550. Legally required for air conditioning installation and servicing, and we hold it.

CHAS Elite accredited

Veriforce CHAS assessed for health and safety, which is why commercial clients and landlords use us.

City & Guilds and BPEC qualified

Qualified, insured engineers on every job. No subcontracted strangers.

700+ reviews, 4.9 on Google

Across Google, Checkatrade and Trustatrader. Read them before you book.

Labour guarantee on every job

12 months on repairs, installations and everything else. Two years on a full bathroom refit. If anything we did develops a fault, we come back and put it right.

Fixed price before we start

The price is agreed with you before any work begins. No hidden extras on the invoice.

24/7, answered by a person

The emergency line is answered every day of the year by someone who can send an engineer, not a call centre.

Fully stocked vans

Five vans carrying the parts that fail most often, so most jobs are fixed on the first visit.

An office team behind every job

An established local business with multiple engineers and a dedicated office team to keep you informed.

Vaillant myREWARDS and Ideal Max accredited

Accredited installer status means extended manufacturer warranties on the boilers we fit.

Emergency response within the hour

Our average response to an emergency call is under an hour across Hertfordshire, Bedfordshire and Cambridgeshire.

Quick check

Do we cover your postcode?

We work across Hertfordshire, Bedfordshire, Cambridgeshire, Milton Keynes and North, East and West London, including Hitchin, Stevenage, St Albans, Luton and Cambridge. Pop your postcode in and see straight away.

If we cover you, tell us what you need and how soon, and we will ring you back. Prefer to talk now? Call 01462 506 374, answered by a person 24/7.

✓ Yes, we cover you. Fill in the short form below and we will ring you back.
We might not cover your area yet. Send it anyway: fill in the short form below and we will ring you back and tell you honestly whether we can reach you.
Sorry, we do not work in South London. For anything else, ring 01462 506 374.