Best 50kW Combi Boilers 2026: Are They Worth It?
Hertfordshire, Bedfordshire & Cambridgeshire
Very few 50kW combi boilers are made for UK homes, and the main one is the Worcester Greenstar 8000+ 50kW, which gives 16 litres a minute of hot water at a 40°C rise and heats radiators at up to 33.8 kW. For most homes a well-chosen 40kW combi, such as the Vaillant ecoTEC plus 940 or Ideal Vogue Max C40, delivers almost as much hot water, and a home that genuinely needs more is usually better served by a system boiler and an unvented cylinder.
In short
- The Worcester Greenstar 8000+ is the main 50kW combi on the UK market, alongside a 45kW version.
- Worcester quotes 16 litres a minute at a 40°C rise for both the 45 and 50kW models, and a heating output of 33.8 kW.
- The Vaillant ecoTEC plus 940 gives 18.0 litres a minute at a 35°C rise, comparable once you allow for the different test basis.
- A 50kW combi needs a very strong mains supply and a gas supply large enough to feed it.
- Two or more showers at once are better served by a system boiler and cylinder.

Why so few 50kW combis exist
A combi heats water as it flows through, so the more hot water you want at once, the more powerful the burner has to be. But a combi can only heat the water your mains supplies. Past a certain point, a bigger burner gives no extra benefit because the incoming supply cannot keep up, and a home with that much demand usually has space for a cylinder that stores hot water instead.
That is why most manufacturers stop their combi ranges at around 35 to 40kW. Baxi’s largest current combi is 36kW, Viessmann’s Vitodens combis go up to 35kW, and Ideal’s largest is the Vogue Max C40. Our boiler installation page explains how we decide between a combi and a system boiler for each home.
The 50kW combi, and the alternatives worth comparing
Figures come from each manufacturer’s published specifications. Worcester quotes hot water flow at a 40°C rise. Most other brands use a 35°C rise, which gives a higher number for the same amount of heat, so compare with care.
| Boiler | Hot water flow | Heating output | Size | Notes |
|---|---|---|---|---|
| Worcester Greenstar 8000+ 50kW | 16 litres a minute at 40°C rise | Up to 33.8 kW | 780 x 440 x 365 mm | Touchscreen, automatic refill, A rated |
| Worcester Greenstar 8000+ 45kW | 16 litres a minute at 40°C rise | Up to 33.8 kW | 780 x 440 x 365 mm | Same published flow as the 50kW |
| Vaillant ecoTEC plus 940 | 18.0 litres a minute at 35°C rise | 4.5 to 29.8 kW | 720 x 440 x 580 mm, 60 kg | Small built-in hot water store, not for LPG |
| Ideal Vogue Max C40 | 16.4 litres a minute at 35°C rise | 5.7 to 32.0 kW | 35.4 kg installation weight | 12 year guarantee through a Max accredited installer |
| Vaillant ecoTEC plus 840 | 16.3 litres a minute at 35°C rise | 4.5 to 29.8 kW | 720 x 440 x 386 mm, 41 kg | Wide modulation, stainless steel heat exchanger |
Reading the figures
Worcester’s 16 litres a minute at a 40°C rise is the same amount of heat as roughly 18 litres a minute at a 35°C rise. On a like-for-like basis, that puts the 50kW Worcester close to the Vaillant ecoTEC plus 940 and a little above the 40kW models. It is a strong combi, but not a dramatic step up.
Worcester also publishes the same 16 litres a minute for its 45kW and 50kW models, so on paper there is no hot water gain from the larger badge. Ask your installer to explain the difference for your home before paying for the bigger model.
Our view of each option
Worcester Greenstar 8000+ 50kW
The 8000+ is Worcester’s premium combi, with a touchscreen display, an automatic refill system that keeps the pressure topped up, and 94% central heating efficiency according to Worcester. The 50kW model heats at up to 33.8 kW, the highest heating output of any combi here, which suits a large home with a high heat loss that also wants a combi. Worcester’s longest guarantees need a Worcester accredited installer. We are not a Worcester accredited installer, but we repair and service Worcester Bosch boilers and can advise on whether this model suits your home.
Vaillant ecoTEC plus 940
The 940 uses a small built-in store of hot water to reach 18.0 litres a minute. It is large and heavy, at 580 mm deep and 60 kg dry, so it needs a suitable wall and space, and Vaillant lists it as not suitable for LPG. As a Vaillant myREWARDS installer, we can offer guarantees of up to 10 years on selected Vaillant boilers.
Ideal Vogue Max C40
The Vogue Max C40 gives 16.4 litres a minute and heats at up to 32.0 kW. It is lighter and simpler to fit than the larger alternatives, and as an Ideal Max accredited installer we can offer Ideal’s 12 year guarantee when it is registered and serviced every year. For many homes asking about 50kW, this is what we would look at first.
What a 50kW combi needs to work
A big combi only performs if the house can feed it.
- A very strong mains supply. To make use of 16 to 18 litres a minute, your mains must deliver at least that much at the taps, with good pressure. Many homes cannot. Our guide to low water pressure in the whole house explains what limits a supply.
- A large enough gas supply. At full hot water output a 50kW combi burns a lot of gas. The pipe from the meter must be sized to feed it along with your hob and any other gas appliances, and in some homes the meter and service pipe also need checking.
- Space and a strong wall. These are large, heavy boilers.
- Good hot water pipework. Long, narrow pipe runs to distant bathrooms lose flow and waste water while you wait for it to run hot.
- A clean system and a filter. A new boiler should go onto clean system water with a magnetic filter fitted.
The limit no boiler can beat If your kitchen cold tap delivers 12 litres a minute, a 50kW combi gives you 12 litres a minute, just hotter. Always measure the mains flow before choosing a large combi.
When a system boiler and cylinder is better
If your home has two or three bathrooms in regular use, or the mains supply is not strong enough for a large combi, a system boiler with an unvented cylinder is usually the better answer. The cylinder stores a large volume of hot water at mains pressure, so several showers and taps can run at once without the flow dropping. It needs space for the cylinder, and the cylinder takes time to reheat after heavy use, but for a busy household it is far more reliable than any combi. Our unvented cylinders page explains how they work.
| Your home | Better choice |
|---|---|
| Bathroom plus en suite, one shower at a time, strong mains | 40kW combi |
| Large home, no room for a cylinder, very strong mains | 45 to 50kW combi, after checking the gas and water supply |
| Two or more showers often running together | System boiler and unvented cylinder |
| Weak or variable mains supply | System boiler and cylinder, or improve the supply first |
Mistakes to avoid
- Buying the biggest badge. The published flow for Worcester’s 45 and 50kW models is the same.
- Comparing flow rates on different bases. Check whether the figure is at a 35°C or 40°C rise.
- Ignoring the gas supply. An undersized pipe stops a large boiler reaching its output.
- Expecting more heating. Even the 50kW Worcester heats at up to 33.8 kW. If you need more heating output, a combi is the wrong tool.
- Skipping the survey. A large combi on the wrong home is an expensive disappointment. Our best combi boilers guide covers the full range of sizes.
How we price it
Installations are quoted as a fixed price after a free survey, so the price you agree is the price you pay. You can get your price online in a couple of minutes with our boiler quote tool. Every new boiler package we fit includes a magnetic system filter, the first year’s service and removal of the old boiler. Repair and service rates are on our prices page.
Frequently asked questions
Is there a 50kW combi boiler?
Yes. Worcester Bosch makes a 50kW version of its Greenstar 8000+ combi, alongside a 45kW version. Most other major brands stop their combi ranges at 35 to 40kW.
How much hot water does a 50kW combi produce?
Worcester quotes 16 litres a minute at a 40°C rise for its 50kW combi, which is roughly 18 litres a minute at the 35°C rise most other brands use. You will only get that if your mains supply can deliver it.
Can a 50kW combi run two showers at once?
It can run two showers, but they share the available flow, so each will be weaker than a single shower on its own. For regular simultaneous showers, a system boiler and cylinder is more reliable.
Is a 50kW combi worth it over a 40kW?
Often not. On a like-for-like basis the hot water gain over a good 40kW combi is modest, and it needs a stronger mains and gas supply. A survey will show whether your home can use the extra output.
What size combi do I need for a large house?
It depends on how many showers run at once and on your mains supply, not the number of bedrooms. Many large homes are better suited to a system boiler with an unvented cylinder than to the largest combi.
Boiler installation in Hertfordshire, Bedfordshire and Cambridgeshire
We are Gas Safe registered (956889), rated 4.9 on Google, an Ideal Max accredited installer and a Vaillant myREWARDS installer. To find out whether a large combi or a system boiler suits your home, see our boiler installation page or call 01462 506374.
What our customers say
Speak to a local engineer
Vantage Plumbing and Heating covers Hertfordshire, Bedfordshire and the surrounding areas. Call and talk to an engineer, or send us the details and we will come back to you with a price.
Gas Safe registered, number 956889. Emergency line answered 24/7.
Boiler engineers near you
Boiler playing up? Book a local Gas Safe engineer
We cover Hertfordshire, Bedfordshire and Cambridgeshire. Choose your town:
Not listed? See all the areas we cover or call 01462 506 374