Skip to main content

Vantage Plumbing and Heating

Best Conventional Boilers 2026: Regular Boilers We Rate

Hertfordshire, Bedfordshire & Cambridgeshire

Fully Stocked Vans12 Month Labour GuaranteeGas Safe Registered 956889

The best conventional boilers for most homes in 2026 are the Ideal Logic Max Heat, the Vaillant ecoTEC plus regular and the Baxi 800 Heat, all compact, efficient and backed by long manufacturer guarantees. A conventional boiler, also called a regular or heat only boiler, is the right choice when your home already has a hot water cylinder and tanks in the loft and you want the simplest, least disruptive replacement, or when your mains water is too weak for a combi or unvented cylinder.

  • A conventional boiler heats water for your radiators and a cylinder, fed by a cold water tank and a feed and expansion tank in the loft.
  • It suits older homes with an existing tank system, several bathrooms and weak mains pressure.
  • Replacing like for like is usually the simplest job, because the pipework stays as it is.
  • Ideal Logic Max Heat, Vaillant ecoTEC plus regular and Baxi 800 Heat are the models we rate.
  • Size it from the home’s heat loss plus the cylinder, not the old boiler’s badge.
Ideal boiler installed by Vantage in a fitted cupboard, with copper pipework and a magnetic system filter
One of our boiler installations: an Ideal combi in a fitted cupboard with a magnetic system filter.

What a conventional boiler is

A conventional boiler heats water that flows round your radiators and through a coil in a hot water cylinder, usually in the airing cupboard. The system is open vented: a cold water storage tank in the loft feeds the cylinder, and a smaller feed and expansion tank keeps the heating circuit topped up. The Energy Saving Trust describes heat only boilers as needing two extra header tanks, usually in the loft, and notes they work well in larger properties with low water pressure.

Because the tank does the storage and the header tanks supply the water, the boiler itself is simple. Most heat only boilers have no built-in pump or expansion vessel, which live elsewhere in the system. That is why they are often the smallest and lightest boilers in a manufacturer’s range.

Conventional vs system vs combi

Conventional (regular)SystemCombi
Hot waterStored in a vented cylinderStored in an unvented cylinderHeated on demand
Loft tanksYes, twoNoNo
Hot water pressureGravity, unless pumpedMains pressureMains pressure
Several taps at onceYesYesLimited
Works with weak mainsYesNot wellNot well
Space neededLoft and airing cupboardAiring cupboardLeast
Best forOlder homes keeping their tanksBusy homes with good mainsOne bathroom homes

If you are thinking of changing type, our guide to the best combi boilers explains when a combi makes sense, and a proper boiler installation survey will test your mains flow before anyone recommends a switch.

When a conventional boiler is the best choice

  • You already have one and the system works. A like for like swap keeps the same pipework, cylinder and tanks, which usually means the least disruption.
  • Your mains water is weak. Gravity fed hot water does not depend on mains pressure, so it can outperform a combi or unvented cylinder on a poor supply.
  • Several bathrooms. Stored hot water serves more than one outlet at a time.
  • Older pipework. Some older systems were never designed for mains pressure. Keeping them open vented avoids stressing old joints and fittings.
  • You want a backup for hot water. Most cylinders have an immersion heater, so you still have hot water if the boiler fails.

It is less suitable if you want to free up the loft, if the tanks are old and in poor condition, or if showers are weak and you want mains pressure without adding a pump.

The best conventional boilers we recommend

Ideal Logic Max Heat

Ideal lists the Logic Max Heat in 12, 15, 18, 24 and 30 kW outputs with a 10 year parts and labour guarantee when registered within 30 days, and describes it as suited to homes with multiple bathrooms. It is compact, easy to service and widely supported. We are an Ideal Max accredited installer, and it is one of the conventional boilers we fit most often.

Vaillant ecoTEC plus regular

Vaillant’s open vent ecoTEC plus models run from 12 kW upwards in a compact case, with a stainless steel heat exchanger and good controls integration. As a Vaillant myREWARDS installer, we can offer manufacturer guarantees of up to 10 years on selected Vaillant boilers we fit.

Baxi 800 Heat

Baxi quotes a 10 year parts and labour warranty on the 800 Heat and supplies it with a magnetic system filter. At 625 mm high, 370 mm wide and 270 mm deep, it is small enough for most kitchen cupboards.

Other models worth knowing

Ideal’s Logic+ Heat is a lower cost option with a 7 year guarantee. Worcester Bosch’s Greenstar Ri range covers 12 to 30 kW. We repair and service all these brands, although we are not a Worcester accredited installer.

BoilerOutputsManufacturer guaranteeNotes
Ideal Logic Max Heat12 to 30 kW10 years when registeredCompact, our most fitted heat only boiler
Vaillant ecoTEC plus regularFrom 12 kWUp to 10 years on selected modelsStainless steel heat exchanger
Baxi 800 HeatSeveral outputs10 yearsMagnetic filter supplied
Ideal Logic+ Heat12 to 30 kW7 yearsLower cost option

How to size a conventional boiler

Size the boiler from the house’s heat loss, plus an allowance for reheating the cylinder. Many older boilers were oversized, so copying the old boiler’s number is a common mistake. Modern boilers modulate their output, but a boiler that is far too big still cycles on and off in mild weather.

The engineer should also check:

  1. The cylinder. An old, uninsulated or undersized cylinder wastes the efficiency of a new boiler. Replacing it at the same time is often worth it.
  2. The loft tanks. Plastic tanks crack and older ones may lack lids and insulation. Both should be in good order.
  3. The pump and valves. On a conventional system these are separate from the boiler, so an old pump or sticking motorised valve can undermine a new boiler.
  4. System water. Sludge in radiators shortens a new boiler’s life. Our power flushing service cleans a badly contaminated system.
  5. Controls. Building Regulations in England require time and temperature controls on any new gas boiler.

Should you switch to a system boiler or combi?

Switching away from a conventional boiler frees up the loft and gives mains pressure hot water, but it is a bigger job. You need good mains flow and pressure, pipework and showers that can cope with mains pressure, and space for an unvented cylinder if you go the system route. Our unvented cylinder page explains what that involves. If your mains is weak, keeping a conventional boiler is often the better decision.

Safety first

  • Only a Gas Safe registered engineer may install or work on a gas boiler. Check their Gas Safe ID card.
  • Loft tanks should have fitted lids and insulation, and the open vent and cold feed pipes that connect the heating to the feed and expansion tank must never be blocked or valved off.
  • If you smell gas, call the National Gas Emergency Service on 0800 111 999, open windows and turn off the gas at the meter if it is safe to do so.

How we price it

Installations are quoted as a fixed price after a free survey, so the price you agree is the price you pay. You can get your price online in a couple of minutes with our boiler quote tool. Every new boiler package includes a magnetic system filter, the first year’s service and removal of the old boiler, and our workmanship carries a 12 month labour guarantee. Our other rates are published on our prices page.

Frequently asked questions

Are conventional boilers still available?

Yes. Ideal, Vaillant, Baxi and Worcester Bosch all make current heat only boilers, and they remain common replacements in older homes with an existing tank and cylinder system.

Is a conventional boiler better than a combi?

Neither is better everywhere. A conventional boiler is better where the home has several bathrooms, weak mains water or an existing tank system. A combi is better in smaller homes with one bathroom and good mains flow.

Are conventional boilers less efficient?

The boiler itself can be just as efficient, as modern heat only boilers are condensing boilers. Some heat is lost from the stored hot water, so a well insulated cylinder and good controls make a real difference.

Can I replace a conventional boiler with a combi?

Often, if your mains flow and pressure are good and your pipework and showers can handle mains pressure. The tanks and cylinder are removed, which frees up space but adds work.

What is the difference between a regular and a conventional boiler?

Nothing. Regular, conventional, heat only and open vent boiler all describe the same type: a boiler that works with a hot water cylinder and tanks in the loft.

Conventional boiler replacement across Hertfordshire, Bedfordshire and Cambridgeshire

If your conventional boiler is due for replacement, our Gas Safe registered engineers can survey the whole system, tank to cylinder, and tell you honestly whether to keep it conventional or change type. See our boiler installation page or call 01462 506374. The phone is answered 24 hours a day, 7 days a week.

What our customers say

Speak to a local engineer

Vantage Plumbing and Heating covers Hertfordshire, Bedfordshire and the surrounding areas. Call and talk to an engineer, or send us the details and we will come back to you with a price.

Gas Safe registered, number 956889. Emergency line answered 24/7.

Trusted & Accredited Professionals
Checkatrade approved trader
City and Guilds qualified engineers
BPEC certified engineers
Gas Safe registered engineers
Elite CHAS accreditation
London and South East England Prestige Awards 2022 winner
Veriforce CHAS accredited contractor

Rather have an engineer look at it?

Call the office, message us on WhatsApp or ask for a callback. We cover Hertfordshire, Bedfordshire and the surrounding areas.

Why choose Vantage

Rated 4.9 on Google from more than 700 reviews across Google, Checkatrade and Trustatrader. Qualified, accredited engineers, a fixed price before any work begins and a labour guarantee on every job, from an established local company with an office team you can actually reach. No job too small.

The Vantage Plumbing and Heating fleet of five fully stocked liveried vans

Gas Safe registered

Company registration 956889. Every gas engineer carries their own Gas Safe ID card, and you can ask to see it.

Refcom F-Gas certified

REF1024550. Legally required for air conditioning installation and servicing, and we hold it.

CHAS Elite accredited

Veriforce CHAS assessed for health and safety, which is why commercial clients and landlords use us.

City & Guilds and BPEC qualified

Qualified, insured engineers on every job. No subcontracted strangers.

700+ reviews, 4.9 on Google

Across Google, Checkatrade and Trustatrader. Read them before you book.

Labour guarantee on every job

12 months on repairs, installations and everything else. Two years on a full bathroom refit. If anything we did develops a fault, we come back and put it right.

Fixed price before we start

The price is agreed with you before any work begins. No hidden extras on the invoice.

24/7, answered by a person

The emergency line is answered every day of the year by someone who can send an engineer, not a call centre.

Fully stocked vans

Five vans carrying the parts that fail most often, so most jobs are fixed on the first visit.

An office team behind every job

An established local business with multiple engineers and a dedicated office team to keep you informed.

Vaillant myREWARDS and Ideal Max accredited

Accredited installer status means extended manufacturer warranties on the boilers we fit.

Emergency response within the hour

Our average response to an emergency call is under an hour across Hertfordshire, Bedfordshire and Cambridgeshire.

Quick check

Do we cover your postcode?

We work across Hertfordshire, Bedfordshire, Cambridgeshire, Milton Keynes and North, East and West London, including Hitchin, Stevenage, St Albans, Luton and Cambridge. Pop your postcode in and see straight away.

If we cover you, tell us what you need and how soon, and we will ring you back. Prefer to talk now? Call 01462 506 374, answered by a person 24/7.

✓ Yes, we cover you. Fill in the short form below and we will ring you back.
We might not cover your area yet. Send it anyway: fill in the short form below and we will ring you back and tell you honestly whether we can reach you.
Sorry, we do not work in South London. For anything else, ring 01462 506 374.