Vaillant Flashing Radiator Symbol: What It Means and What to Do
Hertfordshire, Bedfordshire & Cambridgeshire
On a Vaillant ecoTEC boiler, a flashing radiator symbol normally means the burner is on and the boiler is heating water for your radiators. It is not a fault: Vaillant’s operating instructions list it as “burner on” in heating mode. It is only worth investigating if the radiators stay cold while it flashes, if the pressure display is flashing too, or if an F code appears on the screen.
In short
- Flashing radiator symbol: the burner is firing for the central heating. This is normal.
- Steady radiator symbol: heating mode is on, but the burner is not firing at that moment.
- A flashing tap symbol means the same thing for hot water.
- A flashing pressure display means the system pressure is outside the permitted range. Vaillant recommend topping up below 0.8 bar.
- Radiators cold while the symbol flashes points to air, a valve, the pump or sludge. That needs checking.

Power flush price
Cold radiators or sludge? See your fixed price now
Tell us how many radiators you have and what your system is, and you get a fixed power flush price straight away, online.
What the radiator symbol means
Vaillant’s current and previous ecoTEC plus operating instructions both describe the radiator symbol as the heating mode indicator. The wording differs slightly between editions, but the meaning of the flash is the same.
| What you see | ecoTEC plus operating instructions (earlier edition) | ecoTEC plus operating instructions (current edition) |
|---|---|---|
| Radiator symbol flashing | Burner on in heating mode | Burner on, heat demand present |
| Radiator symbol steady | Heating mode heat requirement | Burner off, no heat demand |
In plain terms: when the symbol flashes, the flame is lit and the boiler is sending heat to the radiators. When it is steady, heating mode is switched on but the burner is not firing right now, for example because the water is already up to temperature or the boiler is waiting before it relights.
Vaillant has made several ranges and display designs over the years, including ecoTEC pro, sustain and exclusive models, and older ecoTEC displays. The symbols can differ between them, so check the operating instructions for your model if what you see does not match this guide.
If the radiators are warming up while the symbol flashes, nothing is wrong. If they are not, or the boiler is showing other warnings, our boiler repair service covers Vaillant boilers, and the phone is answered 24 hours a day, 7 days a week.
The other Vaillant display symbols
| Symbol | Steady | Flashing |
|---|---|---|
| Radiator (heating) | Heating mode on, burner not firing | Burner on for heating |
| Tap (hot water) | Hot water mode on, burner not firing | Burner on for hot water |
| Pressure display | Pressure within the permitted range | Pressure outside the permitted range |
| Flame and bars | Burner on, bars show the current burner output | |
| Anti-cycling symbol | Burner is waiting before relighting, to avoid switching on and off too often | |
| Spanner (maintenance) | A maintenance message is stored | |
| F followed by a number | A fault. The number tells you which |
The anti-cycling pause is normal. Vaillant say it avoids frequent switching on and off and increases the boiler’s working life.
When a flashing radiator symbol is a problem
The flash itself is never the fault. It becomes a clue when something else is wrong at the same time.
| What you notice | What it usually means | What to do |
|---|---|---|
| Symbol flashing, radiators warming up | Normal heating | Nothing |
| Symbol flashing, all radiators cold | Burner on, but heat is not getting round: pump, a closed or stuck valve, or airlocks | Check valves and bleed radiators, then book an engineer |
| Symbol flashing, some radiators cold | Air, sludge or unbalanced radiators | Bleed, check valves, consider a system clean |
| Symbol flashing and pressure display flashing | Pressure outside the permitted range | Check the gauge, top up if low as the user guide describes |
| Symbol flashing all the time, house too hot | Something is still calling for heat | Check the thermostat and timer |
| F code on the display | A fault has stopped or limited the boiler | Note the code, see the guides below |
Check these first
These checks are all safe for a homeowner and none of them involve opening the boiler.
- Feel the radiators. If they are warming, the flashing symbol is just normal operation.
- Check the pressure. Vaillant recommend a filling pressure of at least 1 bar, with about 1.5 bar a good value, and say to top up if it falls below 0.8 bar. Use the filling device as your user guide or installer explains. If it keeps falling, see our guide on Vaillant F22, the low water pressure fault.
- Check the thermostat and timer. Turn the thermostat up if you want heat, or down if the house is already too warm and the boiler keeps firing.
- Bleed the radiators. Cold tops mean trapped air. Our guide on how to bleed a radiator walks through it. Recheck the pressure afterwards.
- Check radiator valves. Make sure the valves are open and thermostatic radiator valves are not turned to off or frost.
- Reset only for a fault code. Vaillant’s instructions allow the reset button to be held for more than three seconds, up to three times, for an ignition fault. If the fault returns, stop and call an engineer.
What not to do
- Do not remove the boiler casing or touch anything inside it. Under the Gas Safety (Installation and Use) Regulations 1998 only a Gas Safe registered engineer may work on a gas appliance.
- Do not overfill when topping up. Too much pressure can make the pressure relief valve discharge outside.
- Do not keep resetting a boiler that shows the same fault code.
- If you smell gas, call the National Gas Emergency Service on 0800 111 999, open doors and windows, do not use electrical switches or naked flames, and turn the gas off at the meter if it is safe to do so.
Radiator symbol flashing but radiators cold
This is the case that needs attention. The boiler says it is firing for the heating, yet the heat is not reaching the radiators. Common causes are:
- Airlocks in the radiators or pipework, especially after the system has been drained.
- A stuck motorised valve on a system or heat-only boiler with a hot water cylinder. The boiler fires, but the valve to the radiators never opens.
- A pump problem, so the water heats in the boiler but does not circulate.
- Sludge or a blocked filter, which restricts flow. The boiler may then overheat and lock out.
- All the radiator valves closed, which happens more often than people think after decorating.
Our guide to a radiator not heating up covers each of these in more detail.
What an engineer will check
A Gas Safe engineer will normally read the boiler’s status and fault history, confirm the burner and pump are working, check the flow through the boiler and any motorised valves, test the pressure and expansion vessel, and look at the magnetic filter and the condition of the system water. If the boiler has been locking out, the fault code guides for Vaillant F28 and F22 explain what those codes involve.
What we charge to fix it
Our prices, before you ring
| Weekday repair visit, Monday to Friday 8am to 5pm, no call-out fee | £150 + VAT £180 inc VAT |
| Evenings and weekends, first hour including the call-out | £297.60 inc VAT |
| Overnight, first hour including the call-out | £330 inc VAT |
| If a new boiler is the better answer, fitted | from £2,780 inc VAT |
The weekday visit is a fixed price. A Gas Safe engineer comes out, finds the fault and does any small fix that needs no parts, with up to an hour on site. If the repair needs parts or more time, you get a fixed price before anything else is done. We cover Hertfordshire, Bedfordshire, Cambridgeshire and North London. Book a boiler repair, see every rate, or get a new boiler price online.
Frequently asked questions
Why is the radiator symbol flashing on my Vaillant boiler?
Because the burner is on and the boiler is heating water for the central heating. Vaillant’s operating instructions list a flashing radiator symbol as burner on in heating mode. It stops flashing when the burner goes off, for example when the house reaches the thermostat setting.
Is a flashing radiator light on a Vaillant a fault?
No. It is a normal status indicator. It only matters if something else is wrong at the same time, such as cold radiators, a flashing pressure display or an F code on the screen.
What does it mean when the radiator symbol is not flashing?
A steady radiator symbol means heating mode is switched on but the burner is not firing at that moment. That is normal when the water is already hot or the boiler is pausing before it relights.
What does the flashing tap symbol mean on a Vaillant?
The tap symbol works the same way for hot water. Flashing means the burner is on to heat hot water, and steady means hot water mode is on but the burner is not firing.
What does a flashing pressure display mean on a Vaillant?
It means the system pressure is outside the permitted range. Vaillant recommend at least 1 bar and say to top up below 0.8 bar. If the pressure is high rather than low, or keeps dropping after you top up, have an engineer check it.
When to call an engineer
If the radiator symbol flashes but the radiators stay cold, the pressure keeps dropping, or an F code keeps coming back after a reset, it needs a Gas Safe engineer. We are Gas Safe registered (956889), a Vaillant myREWARDS installer, based in Stevenage, and we cover Hertfordshire, Bedfordshire and Cambridgeshire with 24/7 emergency cover. Book through our boiler repair page or call 01462 506374.
Need help today?
Call and speak to a person, any hour, any day of the year, or get a fixed price quote online.
Get a fixed price quote Call 01462 506 374Rather have an engineer look at it?
Call the office, message us on WhatsApp or ask for a callback. We cover Hertfordshire, Bedfordshire and the surrounding areas.
What our customers say
Speak to a local engineer
Vantage Plumbing and Heating covers Hertfordshire, Bedfordshire and the surrounding areas. Call and talk to an engineer, or send us the details and we will come back to you with a price.
Gas Safe registered, number 956889. Emergency line answered 24/7.
Boiler engineers near you
Boiler playing up? Book a local Gas Safe engineer
We cover Hertfordshire, Bedfordshire and Cambridgeshire. Choose your town:
Not listed? See all the areas we cover or call 01462 506 374