Converting a Shower Room to a Bathroom: What to Consider
Hertfordshire, Bedfordshire & Cambridgeshire
You can convert most shower rooms into a bathroom if the room is at least long enough for a bath, which is usually 1,700mm on the longest wall, although compact 1,500mm and 1,600mm baths and shower baths help in tighter rooms. The other things to check before you commit are whether your boiler or cylinder can fill a bath, where the bath waste can drain, whether the floor can take the weight, and how the electrics and ventilation will be affected.
- Measure first: a standard bath is 1,700mm by 700mm, and you need space to stand and dry alongside it.
- A bath needs a lot of hot water at once, so check what your combi boiler or cylinder can deliver.
- The bath waste has to reach the soil pipe with enough fall, which can be harder than a shower tray.
- A filled bath is heavy, so older timber floors may need checking or strengthening.
- A shower over the bath keeps a shower in the room, as long as the screen and tiling are done properly.

Why people switch from a shower room back to a bath
For years the trend ran the other way, with baths ripped out to make room for walk-in showers. Now plenty of households want one back. The usual reasons are:
- a new baby or young children, who are far easier to wash in a bath
- the only bath in the house was removed and family members miss it
- wanting a soak after work or sport
- thinking ahead to selling, because many buyers with families look for at least one bath in the house
It is worth asking how long you will really use it. If the bath is only for a baby for a couple of years, a baby bath in the shower tray might do. If it is for the long term, a proper conversion as part of a bathroom renovation makes sense.
Will a bath fit? Space and layout
Measure the longest clear wall, then the width of the room, and mark out the bath on the floor with tape. It is the quickest way to see whether the room still works.
| Bath option | Typical size | Good for |
|---|---|---|
| Standard straight bath | 1,700mm by 700mm | Most family bathrooms |
| Compact straight bath | 1,500mm or 1,600mm long | Small rooms where 1,700mm will not fit |
| Shower bath (P-shaped or L-shaped) | Wider at the shower end | Showering over the bath with more elbow room |
| Freestanding bath | Needs space on all sides | Larger rooms where the bath is the feature |
| Deep or Japanese-style soaking bath | Short but deep | Very small rooms, though stepping in is harder |
Remember the door swing, the toilet, the basin and somewhere to stand when you get out. In a narrow room, a shower bath along the back wall with the toilet and basin opposite is often the layout that works. A good designer will show you more than one option. Our guide to choosing a bathroom installer covers the questions to ask at the design stage.
Can your hot water keep up?
This is the part people most often overlook. A shower uses hot water steadily. A bath needs a large amount all at once.
- Combi boiler. A combi heats water as it flows, so it will fill a bath, but only at the rate its hot water output allows. A small combi on a low mains flow can take a long time, and the water may cool before the bath is full.
- Hot water cylinder. A cylinder stores hot water, so it fills a bath faster, but it needs enough stored capacity for the bath plus anyone else who needs hot water afterwards.
- Unvented cylinder. Runs at mains pressure, so baths fill quickly and showers over the bath perform well.
If the house has grown, or you plan to use the bath and shower at the same time, it may be the right moment to review the heating system. Our unvented cylinder service can advise whether stored hot water suits your home.
Drainage: where will the bath waste go?
A shower tray waste and a bath waste are different sizes and sit in different places. The bath waste needs a clear run to the soil stack or an existing waste pipe, with a steady fall along its length. Things that can complicate it:
- the bath has to sit on a different wall from the old shower
- the pipe would have to cross joists running the wrong way
- a solid concrete floor, where pipes cannot be hidden under the boards
- the soil pipe being on the far side of the room
There is usually a solution, such as boxing the pipe behind a bath panel or a stud wall, or turning the layout around. It just needs planning before you choose the bath.
Is the floor strong enough?
A filled bath with someone in it is far heavier than a shower tray and a person standing on it. Most modern floors cope with a standard acrylic bath, but it is worth an assessment if:
- you want a cast iron or stone resin freestanding bath
- the house is old and the joists are notched from past plumbing work
- the floor already bounces or creaks
Your installer should lift a board and check. Strengthening a floor is much easier during the conversion than afterwards.
Keeping a shower in the room
You do not have to choose between a bath and a shower. A shower over the bath needs:
- a thermostatic mixer or bath shower mixer, so the temperature stays safe if someone runs a tap elsewhere
- a fixed screen, or a curtain, long enough to stop water reaching the floor
- full-height tiling or wall panels around the bath, with the right waterproofing behind
- a bath that is well supported and sealed, because a bath that flexes will break its silicone seal and leak
If the old shower was electric, it can often be reused over the bath, but its position and the bathroom zones need checking. Our shower installation team can advise.
Electrics and ventilation
Bathrooms are a special location in the wiring regulations, divided into zones around the bath and shower. Lighting, shaver sockets and extractor fans have to suit their zone, and any new circuit, or any addition or alteration to circuits in the room, is notifiable under Part P of the Building Regulations. Moving the bath can move the zones, so lights that were fine beside a shower may need changing.
A bath creates a lot of steam, so a working extractor fan is essential. Approved Document F sets a minimum extract rate for bathrooms, and a fan with an overrun timer helps clear moisture after you leave the room.
Safety points
- Electrical work in a bathroom must be done by a qualified electrician and certified.
- Any change to a gas boiler or its hot water supply must be done by a Gas Safe registered engineer.
- Do not run a bath waste into a gully or pipe that is not designed for it, because it can cause smells and blockages.
Mistakes to avoid
- Choosing the bath before checking the plumbing. Plan the waste and hot water first, then pick the bath.
- Squeezing in a bath that makes the room unusable. If you cannot open the door or stand to dry, think again.
- Skimping on waterproofing around a shower over the bath.
- Forgetting future needs. Stepping over a bath edge gets harder with age. If that is a concern, see our accessible bathrooms page.
How we price it
Installations are quoted as a fixed price after a free survey, so the price you agree is the price you pay. The survey is where we check the space, hot water, drainage, floor and electrics, so there are no surprises once work starts. Our guide to what a bathroom quote should include shows what to look for in any quote. Every rate for smaller jobs is published on our prices page. Our bathroom installations carry a 12 month guarantee.
Frequently asked questions
Does a shower room count as a bathroom?
In everyday use, a bathroom has a bath, while a shower room has a shower but no bath. Estate agents usually describe them separately, and many buyers with young children look for at least one bath in the property.
What is the smallest bath I can fit?
Straight baths commonly start at around 1,500mm long. Deep soaking baths can be shorter still, but they are harder to step into. Always check the depth and width against the room before you order.
Can I have a bath and a walk-in shower in a small room?
Usually not in a small room. The usual compromise is a shower bath, which is wider at the shower end, with a fixed screen. It gives a good shower and a full-length bath in the space of one.
Will my combi boiler fill a bath?
Yes, but the speed depends on its hot water output and your mains water flow. Larger combis fill a bath more quickly. If filling is very slow now, have the boiler and water pressure checked before the conversion.
How long does it take to convert a shower room to a bathroom?
It depends on how much changes. A straight swap on the same wall is quicker than moving the soil pipe or strengthening the floor. Your installer should give you a programme of works with the quote.
Bathroom conversions in Hertfordshire, Bedfordshire and Cambridgeshire
If you want a bath back in the house, we can survey the room, check the plumbing, hot water and floor, and design a layout that works. See our bathroom renovation page or call 01462 506374.
What our customers say
Speak to a local engineer
Vantage Plumbing and Heating covers Hertfordshire, Bedfordshire and the surrounding areas. Call and talk to an engineer, or send us the details and we will come back to you with a price.
Gas Safe registered, number 956889. Emergency line answered 24/7.
Bathroom fitters near you
Planning a new bathroom? Our own team designs and fits it
We cover Hertfordshire, Bedfordshire and Cambridgeshire. Choose your town:
Not listed? See all the areas we cover or call 01462 506 374