Skip to main content

Vantage Plumbing and Heating

Soakaways Explained: How They Work and When You Need One

Hertfordshire, Bedfordshire & Cambridgeshire

Fully Stocked Vans12 Month Labour GuaranteeGas Safe Registered 956889

A soakaway is an underground pit, filled with rubble or plastic crates, that collects rainwater from your roof or driveway and lets it soak slowly into the surrounding ground instead of sending it to the sewer. It works by holding the water from a downpour and releasing it into the soil over the following hours, so it only functions well in ground that drains and when it is kept free of silt.

In short

  • A soakaway takes surface water (rainwater from roofs, gutters and hard standing), never toilet or kitchen waste.
  • It stores the burst of water from a storm, then lets it seep into the soil through its sides and base.
  • Older soakaways are usually rubble-filled pits. Modern ones use plastic crates wrapped in a geotextile membrane.
  • Signs of failure include overflowing gullies, water pooling on the lawn and downpipes that back up in heavy rain.
  • New soakaways should be sized from a percolation test and kept well away from the house.
CCTV drain survey camera screen used by Vantage
The screen from one of our CCTV drain surveys.

What a soakaway does

When it rains, a roof collects a surprising amount of water in a short time. Every downpipe needs somewhere to send it. In many homes that is a gully or pipe connected to the public sewer. In others, especially older properties and those without a surface water sewer nearby, it goes to a soakaway in the garden.

A soakaway is simply a buried void. The pipe from the downpipe or gully runs into it, the void fills during the storm, and the water then drains out into the soil. The void matters because rain arrives much faster than any soil can absorb it. The soakaway acts as a buffer, holding the storm’s water until the ground can take it.

Our drainage services team deals with soakaways alongside drains and gullies, because a failing soakaway often looks like a blocked drain from the surface.

How it works, step by step

  1. Collection. Rain runs off the roof into the gutters and down the downpipe, or off a patio or drive into a channel or gully.
  2. Silt trap. In a well-designed system, the water passes through a catchpit or silt trap first, which holds back leaves, grit and moss before they reach the soakaway.
  3. Storage. The water enters the soakaway chamber, which fills up. In a crate soakaway most of the volume is open space. In a rubble soakaway the water sits in the gaps between the stones.
  4. Infiltration. The water passes out through the sides and base into the surrounding soil. A geotextile membrane around crates stops soil washing in while letting water out.
  5. Recovery. Between storms the chamber empties, ready for the next one. A healthy soakaway should be empty, or close to it, a day or two after heavy rain.

Types of soakaway

TypeHow it is builtProsCons
Rubble-filled pitA hole filled with broken brick, stone or hardcore, often topped with soilCheap, common in older homesHolds less water because the stones take up space, silts up over time, cannot be inspected or cleaned
Plastic crate (cell) systemLightweight crates wrapped in geotextile, buried in a trenchMostly open space so stores far more per cubic metre, can include inspection accessMust be designed for the load above, needs a membrane that is correctly fitted
Concrete ring or chamberPerforated concrete rings stacked in a pit with granular fill around themStrong, can be inspected and emptiedHeavier and more work to install

What can and cannot go into a soakaway

A domestic soakaway is for clean surface water only.

  • Yes: rainwater from roofs, gutters and downpipes, and runoff from patios and drives. Condensate from a condensing boiler is sometimes piped to a purpose-made soakaway, although an internal waste pipe is the preferred route. Our frozen condensate pipe guide explains why that pipe matters in winter.
  • No: toilets, sinks, showers, washing machines or dishwashers. That is foul water, and it must go to the foul sewer or to a properly designed sewage treatment system. Waste from a septic tank or treatment plant goes to a drainage field, which is designed differently.
  • No: oil, paint, chemicals or anything that would pollute the ground.

If a sink, shower or appliance has been connected to a surface water pipe by mistake, it is called a misconnection and it should be put right. It pollutes the soil or the watercourse the surface water ends up in.

How to tell if you have a soakaway

  • Follow each downpipe. If it goes into a gully that also takes kitchen or bathroom waste, it probably goes to the combined sewer. If it goes straight into the ground with no gully and no manhole nearby, it may go to a soakaway.
  • Look for a low spot or a slightly sunken patch in the lawn, often several metres from the house, especially where puddles form after heavy rain.
  • Check your property paperwork. The drainage search from when you bought the house, or building control drawings for an extension, may show it.
  • A CCTV survey will confirm where each pipe goes. Our CCTV drain surveys can trace a surface water run to its end.

Some sewerage companies reduce the surface water part of the bill if none of your rainwater drains to the public sewer. If you know your roof drains to a soakaway, it is worth asking yours.

Signs a soakaway is failing

  • Gullies or downpipe shoes overflowing in heavy rain.
  • Water pooling on the lawn or patio, or a soggy patch that never dries.
  • Gutters that overflow even though they are clear, because the water has nowhere to go.
  • Water taking a long time to drain away after a storm.
  • A dip or hole appearing in the ground where a rubble soakaway has collapsed.

Why soakaways fail

Silt and debris. Leaves, moss, grit and soil wash in over years and fill the voids. This is the most common cause, especially on rubble soakaways without a silt trap.

The ground cannot take the water. Ground in Hertfordshire varies a lot, from chalk that usually drains well to heavy clay that does not. A soakaway dug in clay can fill in a storm and take days to empty. A high water table in winter can have the same effect.

Undersized from the start. Many older soakaways were never sized for the roof area feeding them. An extension that adds more roof to the same soakaway can tip it over the edge.

Roots. Tree and shrub roots grow into the voids and the pipe that feeds them, looking for water.

Collapse. Old rubble soakaways, and brick chambers without proper support, can collapse over time.

A blocked or broken pipe. Sometimes the soakaway is fine and the pipe leading to it is blocked or cracked. Our drain blockage service clears these.

Stay safe Do not dig into a soakaway or an open excavation deeper than you can safely stand in, and never enter one. The sides can collapse without warning. Keep children and pets away from any hole or sunken patch until it has been made safe.

What can be done about a failing soakaway

  1. Clear the feed pipe and silt trap. If the problem is upstream, jetting the pipe and emptying the catchpit may be all it needs.
  2. Survey it. A camera survey shows whether the pipe is sound and whether water is reaching the soakaway at all.
  3. Test the ground. Digging a trial hole and timing how quickly water drains away shows whether the soil can take the water.
  4. Replace or enlarge it. A silted rubble soakaway usually cannot be cleaned, so it is dug out and replaced, often with a crate system that stores more water in the same space.
  5. Consider an alternative. Where the ground will not drain, the options include connecting to a surface water sewer (which needs the sewerage company’s consent), adding water butts or a rain garden to reduce the load, or storing water and releasing it slowly.

Building a new soakaway: what is involved

A new soakaway is more than a hole full of rubble. A good installation includes:

  • A percolation test. A trial pit is dug to the proposed depth, filled with water and timed as it drains, usually more than once. The widely used method for this is BRE Digest 365, which also gives the calculation for sizing the soakaway.
  • Sizing. The size depends on the roof or paved area feeding it and on how fast the ground drains.
  • The right position. Building Regulations guidance says soakaways should be kept at least 5 metres from a building, so that water is not directed towards the foundations. They should also stay clear of boundaries, trees and other drainage.
  • A silt trap upstream so it stays clear for longer.
  • Approval where needed. New drainage for an extension or new build is usually covered by Building Regulations, so check with building control or your builder.

Our guide to choosing a drainage engineer lists the questions worth asking before anyone starts digging.

What it costs with Vantage

In normal working hours there is no call-out fee. Time is charged in half-hour steps after the first hour, and larger jobs such as replacing or enlarging a soakaway are quoted before any work starts. Evening, weekend and overnight visits are charged at the out-of-hours rates. Every rate is published on our prices page, so you know what you will pay before we arrive.

Trusted & Accredited Professionals
Checkatrade approved trader
City and Guilds qualified engineers
BPEC certified engineers
Gas Safe registered engineers
Elite CHAS accreditation
London and South East England Prestige Awards 2022 winner
Veriforce CHAS accredited contractor

Frequently asked questions

What happens when a soakaway is full?

The water has nowhere to go, so it backs up the pipe and overflows at the lowest point, usually a gully, a downpipe shoe or the lawn. If it is full all the time, even in dry spells, it has silted up or the ground cannot absorb water fast enough.

How long does a soakaway last?

A well-designed soakaway with a silt trap can last for decades. Rubble soakaways without a trap tend to silt up much sooner, and one that fails repeatedly usually needs replacing rather than clearing.

How deep should a garden soakaway be?

It depends on the ground and the volume of water, which is why a percolation test comes first. The base needs to sit in soil that drains and above the winter water table, and the design should follow a recognised sizing method.

Can I connect my soakaway to the sewer instead?

Possibly, but you need the sewerage company’s consent to connect surface water to a public sewer, and some areas have no surface water sewer nearby. Rainwater should never be connected to a foul-only sewer without that consent.

Who is responsible for a soakaway?

A soakaway within your property that serves only your home is normally your responsibility. Shared drainage is different. Our guide on who is responsible for clearing a blocked drain explains where the lines usually fall.

Soakaway help in Hertfordshire, Bedfordshire and Cambridgeshire

If your gullies overflow in heavy rain or your lawn holds water, we can trace the pipework, find out whether the soakaway or the drain is at fault and tell you honestly what it needs. See our drainage services or call 01462 506374, answered 24 hours a day, 7 days a week.

Rather have an engineer look at it?

Call the office, message us on WhatsApp or ask for a callback. We cover Hertfordshire, Bedfordshire and the surrounding areas.

Why choose Vantage

Rated 4.9 on Google from more than 700 reviews across Google, Checkatrade and Trustatrader. Qualified, accredited engineers, a fixed price before any work begins and a labour guarantee on every job, from an established local company with an office team you can actually reach. No job too small.

The Vantage Plumbing and Heating fleet of five fully stocked liveried vans

Gas Safe registered

Company registration 956889. Every gas engineer carries their own Gas Safe ID card, and you can ask to see it.

Refcom F-Gas certified

REF1024550. Legally required for air conditioning installation and servicing, and we hold it.

CHAS Elite accredited

Veriforce CHAS assessed for health and safety, which is why commercial clients and landlords use us.

City & Guilds and BPEC qualified

Qualified, insured engineers on every job. No subcontracted strangers.

700+ reviews, 4.9 on Google

Across Google, Checkatrade and Trustatrader. Read them before you book.

Labour guarantee on every job

12 months on repairs, installations and everything else. Two years on a full bathroom refit. If anything we did develops a fault, we come back and put it right.

Fixed price before we start

The price is agreed with you before any work begins. No hidden extras on the invoice.

24/7, answered by a person

The emergency line is answered every day of the year by someone who can send an engineer, not a call centre.

Fully stocked vans

Five vans carrying the parts that fail most often, so most jobs are fixed on the first visit.

An office team behind every job

An established local business with multiple engineers and a dedicated office team to keep you informed.

Vaillant myREWARDS and Ideal Max accredited

Accredited installer status means extended manufacturer warranties on the boilers we fit.

Emergency response within the hour

Our average response to an emergency call is under an hour across Hertfordshire, Bedfordshire and Cambridgeshire.

What our customers say

Speak to a local engineer

Vantage Plumbing and Heating covers Hertfordshire, Bedfordshire and the surrounding areas. Call and talk to an engineer, or send us the details and we will come back to you with a price.

Gas Safe registered, number 956889. Emergency line answered 24/7.

Quick check

Do we cover your postcode?

We work across Hertfordshire, Bedfordshire, Cambridgeshire, Milton Keynes and North, East and West London, including Hitchin, Stevenage, St Albans, Luton and Cambridge. Pop your postcode in and see straight away.

If we cover you, tell us what you need and how soon, and we will ring you back. Prefer to talk now? Call 01462 506 374, answered by a person 24/7.

✓ Yes, we cover you. Fill in the short form below and we will ring you back.
We might not cover your area yet. Send it anyway: fill in the short form below and we will ring you back and tell you honestly whether we can reach you.
Sorry, we do not work in South London. For anything else, ring 01462 506 374.