Modern or Traditional Bathroom: Which Style Suits Your Home?
Hertfordshire, Bedfordshire & Cambridgeshire
A modern bathroom uses clean lines and hidden workings: wall-hung or back-to-wall toilets with concealed cisterns, vanity units, walk-in showers with frameless glass and large-format tiles. A traditional bathroom leans on period shapes such as roll-top baths, high- or low-level cisterns, pedestal basins, cross-head taps and exposed shower valves. The right choice depends on the age and character of your home, the size of the room, how much cleaning you want to do and how long you plan to stay, and plenty of homes suit a mix of the two.
In short
- Modern: minimal, easy to clean, good in small rooms, but concealed cisterns and valves need planning for access.
- Traditional: suits period homes and larger rooms, feels timeless, but freestanding baths and exposed pipework take more space and more cleaning.
- Modern toilets are usually rimless, dual flush and often wall-hung or back-to-wall. Traditional toilets have a visible cistern, sometimes on the wall above the pan.
- In England and Wales, every toilet fitted since 2001 must flush with no more than 6 litres, whatever the style.
- A “transitional” bathroom, with traditional shapes and modern practicality, is often the safest choice for resale.

What makes a bathroom modern or traditional?
The difference is mostly in the shapes, the finishes and how much of the plumbing you can see. Here is how the two styles usually compare, piece by piece.
| Element | Modern bathroom | Traditional bathroom |
|---|---|---|
| Toilet | Wall-hung or back-to-wall, rimless pan, concealed cistern, flush plate | Close-coupled with a shaped cistern, or high or low-level cistern with a chain or lever |
| Basin | Wall-hung or on a vanity unit, square or thin-edged | Pedestal or washstand basin with curved edges |
| Bath | Built-in, straight-sided, or a slim freestanding tub | Roll-top or slipper bath on feet |
| Shower | Walk-in or wet room, concealed valve, fixed rainfall head, frameless glass | Exposed thermostatic valve with a rigid riser and large head, or a bath shower mixer |
| Taps | Single-lever or wall-mounted mixers | Cross-head or lever taps, often in chrome, nickel or brass |
| Tiles | Large-format porcelain, stone effect, few grout lines | Metro wall tiles, patterned or chequerboard floors, tongue and groove panelling |
| Heating | Slim towel rail or underfloor heating | Column radiator or a traditional towel warmer |
| Storage | Wall-hung vanity units, recessed niches, mirrored cabinets | Freestanding cabinets, washstands with shelves |
You can see finished examples of both styles, and mixes of the two, in our bathroom gallery.
Modern toilets and traditional toilets compared
The toilet is where the two styles differ most in practice, because it changes how the room is built and how easy it is to clean and repair.
Modern toilet types
- Close-coupled. The cistern sits directly on the back of the pan. It is the most common toilet in UK homes and comes in both modern and traditional shapes.
- Back-to-wall. The pan sits flush against a unit or boxed-in wall, with the cistern hidden behind it. The pipework disappears, which makes cleaning around the base much easier.
- Wall-hung. The pan is fixed to a steel frame inside the wall, with the cistern concealed in the frame. The floor underneath stays clear, which makes a small room look larger and is easy to mop. The frame has to be installed properly, and you need an access panel, usually behind the flush plate, to reach the valves.
- Rimless pans. Most modern toilets are now rimless. The flush water is directed around the bowl without the hidden rim where dirt and limescale build up, which matters in hard-water areas like much of Hertfordshire.
- Comfort height. A taller pan is easier to sit on and stand up from, useful for older family members or anyone with mobility needs.
Traditional toilet types
- High-level cistern. The cistern is mounted high on the wall with a long flush pipe and a chain pull. It needs good ceiling height and suits Victorian and Edwardian homes.
- Low-level cistern. The cistern sits a short way above the pan on a short flush pipe, with a lever. It gives the period look without needing a high ceiling.
- Traditional close-coupled. A curved pan and cistern with a lever handle, often paired with a wooden or soft-close seat.
The rules apply to every style
Whatever toilet you choose, it must meet the Water Supply (Water Fittings) Regulations 1999. Any toilet flushing device installed since January 2001 can use no more than 6 litres for a full flush, and on a dual flush toilet the smaller flush can be no more than two-thirds of the full one. Each cistern also needs a servicing valve so the water can be turned off to repair it. That is why concealed cisterns must have access: a hidden cistern still needs its valve and fill mechanism to be reachable.
Pros and cons of each style
| Style | Works best in | Things to watch |
|---|---|---|
| Modern | Newer homes, small bathrooms and en suites, busy family bathrooms, anyone who wants easy cleaning | Concealed cisterns and valves must be accessible. Wall-hung pieces need solid frames or walls. Very plain rooms can feel cold without texture |
| Traditional | Victorian, Edwardian and 1930s homes, larger rooms, anyone after character | Freestanding baths need space all round. Exposed pipework and feet take more cleaning. Cast iron baths are very heavy when full, so the floor may need checking |
| Transitional (a mix) | Almost any home, especially if you may sell in a few years | Needs a clear plan so it looks deliberate rather than mismatched |
How to choose the right style for your home
- Start with the house. A period terrace often looks best with a traditional or transitional bathroom that echoes its features. A newer home usually suits a modern scheme. It is not a rule, but a style that fights the house can look out of place.
- Measure the room. In a small bathroom, wall-hung toilets and basins free up floor space and make the room feel bigger. A roll-top bath needs clearance around it to look right and to be cleaned.
- Think about cleaning. Rimless pans, wall-hung pieces and large tiles with few grout lines are quicker to keep clean. Clawed feet, exposed pipework and patterned tiles take more effort.
- Check your water system. A walk-in shower and a large rainfall head need good flow. A combi boiler or unvented cylinder usually gives mains-pressure hot water. An older gravity-fed system may need a different shower choice. Our shower installation page explains the options.
- Plan for the future. A level-access shower, comfort-height toilet and good grab points can be designed into either style.
- Set a budget early. Concealed frames, underfloor heating and period-style sanitaryware all add to the job. Our bathroom renovation cost guide explains what drives the price.
Mixing modern and traditional
A transitional bathroom combines traditional shapes with modern function. Common combinations that work well:
- A freestanding bath with a modern walk-in shower beside it.
- Metro tiles or panelling paired with a wall-hung vanity unit.
- A traditional close-coupled toilet with a rimless pan and soft-close seat.
- An exposed thermostatic shower valve in a modern tiled enclosure.
The trick is to keep one thread running through the room, such as the same tap finish throughout, or one tile repeated on the floor and in the shower. Our guide to common bathroom renovation mistakes covers other traps to avoid at the planning stage.
Practical points before you commit
- Concealed plumbing needs a wall to hide it in. Wall-hung toilets and concealed shower valves need a stud wall or a boxed-in section, which takes a little depth out of the room.
- Freestanding baths need pipes to reach them. The waste and, for floor-standing taps, the supply pipes usually run under the floor, so floor type matters.
- Heavy baths need a sound floor. Cast iron and stone resin baths are heavy, especially when full.
- Ventilation matters in any style. A good extractor fan protects the paintwork and grout.
How we price it
Installations are quoted as a fixed price after a free survey, so the price you agree is the price you pay. The survey is where we measure up, look at the walls, floor and water system, and talk through the style you want. Our bathroom installations come with a 12 month guarantee on our work. For other work, our prices page explains how we charge.
Frequently asked questions
Are modern toilets better than old ones?
In most ways, yes. New toilets use a maximum of 6 litres per flush, most are dual flush, and rimless pans are easier to keep clean. An older toilet that works well does not need replacing just for style, but a new one usually saves water and cleaning time.
What toilet do plumbers recommend?
We usually suggest a rimless pan with a dual flush from a manufacturer with good UK parts supply, because fill valves and flush valves do wear out. For small rooms a wall-hung or back-to-wall toilet works well, as long as the cistern has proper access for servicing.
Is a wall-hung toilet a good idea?
It can be, especially in small bathrooms, because the floor stays clear and easy to clean. It needs a strong frame fitted inside the wall and an access panel for the cistern, so it is best fitted as part of a renovation rather than as a quick swap.
Can you put a modern bathroom in a period house?
Yes, and it can look very good if it is done with care. Keeping some period features, such as original doors, windows or a column radiator, helps a modern suite sit comfortably in an older home.
Which bathroom style is best for resale?
A clean, neutral bathroom with a good shower and easy-clean surfaces appeals to most buyers. A transitional style often works best because it suits a wide range of tastes without looking dated quickly.
Rather have an engineer look at it?
Call the office, message us on WhatsApp or ask for a callback. We cover Hertfordshire, Bedfordshire and the surrounding areas.
See our work and plan your bathroom
The easiest way to decide between modern and traditional is to see both in real homes. Browse our bathroom gallery for finished projects, then talk to us about your room. We design and fit bathrooms across Hertfordshire, Bedfordshire and Cambridgeshire from our base in Stevenage. Call 01462 506374 to book a free survey.
What our customers say
Speak to a local engineer
Vantage Plumbing and Heating covers Hertfordshire, Bedfordshire and the surrounding areas. Call and talk to an engineer, or send us the details and we will come back to you with a price.
Gas Safe registered, number 956889. Emergency line answered 24/7.
Bathroom fitters near you
Planning a new bathroom? Our own team designs and fits it
We cover Hertfordshire, Bedfordshire and Cambridgeshire. Choose your town:
Not listed? See all the areas we cover or call 01462 506 374