Skip to main content

Vantage Plumbing and Heating

Vaillant ecoTEC Plus Review 2026: An Installer’s Verdict

Hertfordshire, Bedfordshire & Cambridgeshire

Fully Stocked Vans12 Month Labour GuaranteeGas Safe Registered 956889

The Vaillant ecoTEC plus is one of the best all-round gas boilers you can buy in 2026: well built, quiet, easy to service, with a stainless steel heat exchanger and some of the strongest hot water flow rates in its class. It is not the cheapest option, and the biggest models are physically large, but for most homes it is a boiler you fit and then stop thinking about.

In short

  • The ecoTEC plus comes as a combi (826, 832, 836, 840 and 940), a system boiler and a regular (open vent) boiler.
  • Combi hot water flow runs from 10.6 litres a minute on the 826 to 18.0 litres a minute on the 940, at a 35°C rise.
  • The current combis use Vaillant’s IoniDETECT combustion control, with a modulation range of up to 1:10, and are A rated for heating and hot water.
  • Vaillant offers guarantees of up to 10 years on the ecoTEC plus, subject to conditions, and longer terms on selected boilers through its installer scheme.
  • Best for one to three bathroom homes that want a reliable, long-lived boiler rather than the lowest price.
Vaillant boiler installed by Vantage with neatly run copper pipework
A Vaillant boiler we installed, with the copper pipework run neatly below it.

What the ecoTEC plus is

The ecoTEC plus is Vaillant’s main wall-hung gas boiler range, sold as a combi, a system boiler and a regular boiler. It is the model most installers reach for when a customer wants a Vaillant, and it is the one we fit most often through our Vaillant boiler installation service.

We are a Vaillant myREWARDS installer, so this review draws on Vaillant’s published specifications and on our own experience fitting, servicing and repairing ecoTEC plus boilers across Hertfordshire and Bedfordshire.

The range has been updated over the years. The current combis carry IoniDETECT, which uses an ionisation signal from the flame to adjust the gas and air mix continuously. You will still see older ecoTEC plus boilers on walls and for sale, so check the exact model and generation when you compare prices or specifications.

ecoTEC plus combi specifications

These figures are taken from Vaillant’s installer product page for the current combi range.

826832836840940
Central heating output2.5 to 19.8 kW3.5 to 24.9 kW3.7 to 29.9 kW4.5 to 29.8 kW4.5 to 29.8 kW
Hot water flow at 35°C rise10.6 litres a minute13.0 litres a minute14.6 litres a minute16.3 litres a minute18.0 litres a minute
ErP rating (heating and hot water)A and AA and AA and AA and AA and A
Size (H x W x D)720 x 440 x 352 mm720 x 440 x 352 mm720 x 440 x 352 mm720 x 440 x 386 mm720 x 440 x 580 mm
Dry weight36 kg37 kg37 kg41 kg60 kg
Heat exchangerStainless steelStainless steelStainless steelStainless steelStainless steel

A few things stand out. The model number is not the heating output: the 826 heats at up to 19.8 kW, and the larger number describes the hot water side. The 940 is a very different box from the rest, far deeper and heavier, and it needs a cupboard or wall that can take it. Vaillant lists the 826 to 836 as adaptable for LPG, and the 940 as not LPG compatible.

The ecoTEC plus also comes as a system boiler for homes with a hot water cylinder, and as a regular boiler for homes with tanks in the loft. Vaillant lists the regular range from 12 to 35 kW (the 412 to 435) in a compact 602 x 375 x 320 mm case weighing about 23 kg, and says these open vent models are hand-built at its Derbyshire factory.

Strengths

Hot water performance. Size for size, the ecoTEC plus combis deliver strong flow rates. The 836 and 840 comfortably suit a home with a main bathroom and an en suite, provided the mains supply can keep up.

Stainless steel heat exchanger. The heat exchanger is the most expensive part of any boiler. Stainless steel is tough and tolerates the acidic condensate that every condensing boiler produces. It still needs clean system water to last, which is why we clean the system and fit a magnetic filter with every new boiler.

Wide modulation. A modulation range of up to 1:10 means the boiler can turn itself right down on mild days instead of switching on and off repeatedly. Less cycling means steadier temperatures, less wear and better real-world efficiency, especially in well-insulated homes.

Quiet and easy to live with. The ecoTEC plus is a quiet boiler in a kitchen cupboard, and the display is clear and straightforward.

Easy to service and repair. Everything is accessible from the front, the fault codes are well documented, and parts are widely stocked by merchants. For a boiler you will own for well over a decade, that matters more than most brochure features.

Good controls. It works with Vaillant’s own sensoCOMFORT, sensoHOME and sensoROOM controls and with myVAILLANT connect for app control. Pairing it with a Vaillant control lets the boiler modulate properly rather than simply switching on and off.

Limits worth knowing

It costs more than budget brands. The ecoTEC plus is priced as a premium boiler. You are paying for build quality, parts support and a long guarantee, and for many people that is money well spent, but it is not the cheapest way to get heat.

The larger models are big. The 840 is deeper than the smaller combis, and the 940 is 580 mm deep and 60 kg dry. A straight swap into an existing kitchen cupboard is not always possible, so a survey should check the space first.

A combi is limited by your mains. No combi can deliver more hot water than your incoming supply provides. If your mains flow is weak, the 840 or 940 will not perform to their figures, and a system boiler with a cylinder may be the better answer.

The guarantee has conditions. Vaillant’s longer guarantees depend on registration and annual servicing. Miss either and you may lose the extended cover. Our boiler servicing keeps the service history in order.

Common faults we see on the ecoTEC plus

No boiler is fault free. On ecoTEC plus boilers of all generations, the codes we are called to most often are:

  • F.28, failed ignition. Often a gas supply problem, a frozen condensate pipe or a worn ignition electrode. See our Vaillant F28 fault code guide.
  • F.22, low water pressure. Usually a small leak on the system or an expansion vessel that needs recharging. Our Vaillant F22 fault code guide explains what to check.
  • F.75, pressure not detected when the pump starts. Commonly air in the system, a pump problem or a faulty pressure sensor. See the Vaillant F75 fault code guide.

None of these is unusual for a modern boiler, and most are caught early by an annual service.

Which ecoTEC plus size do you need?

HomeTypical choiceWhy
Flat or small house, one bathroom826 or 832Plenty of heat, one shower at a time
Three or four bedroom house, one bathroom832 or 836Stronger shower, more heating output
House with a bathroom and an en suite836 or 840Higher hot water flow, if the mains can supply it
Larger home, high hot water demand940, or a system boiler with a cylinderHighest flow in the combi range, but check space and mains

This is a guide, not a sizing calculation. The right boiler depends on your heat loss, your mains flow and pressure, and how many people use hot water at once, which is exactly what a survey measures.

How it compares

The ecoTEC plus is our usual recommendation when someone wants a Vaillant, because the one range covers combi, system and regular installations and works with the same family of Vaillant controls. Our best combi boilers guide puts the ecoTEC plus alongside the other combis we fit, including the Ideal Logic Max.

Our verdict

For most homes that want a dependable boiler with strong hot water and a long life, the ecoTEC plus is an easy recommendation. Choose the size carefully, fit it on a clean system with a good control, and service it every year. If your home has two bathrooms in regular use or weak mains, have the survey check whether a system boiler would serve you better before you commit.

How we price it

Installations are quoted as a fixed price after a free survey, so the price you agree is the price you pay. You can get your price online in a couple of minutes with our boiler quote tool. As a Vaillant myREWARDS installer we can offer manufacturer guarantees of up to 10 years on selected Vaillant boilers, and we will confirm which term applies to your model on the survey. For repairs and servicing on an existing ecoTEC plus, our rates are published on our prices page.

Trusted & Accredited Professionals
Checkatrade approved trader
City and Guilds qualified engineers
BPEC certified engineers
Gas Safe registered engineers
Elite CHAS accreditation
London and South East England Prestige Awards 2022 winner
Veriforce CHAS accredited contractor

Frequently asked questions

Is the Vaillant ecoTEC plus a good boiler?

Yes. It is well built, efficient, quiet and easy to service, with a stainless steel heat exchanger and strong hot water flow. Like any boiler, its lifespan depends on correct sizing, a clean system and annual servicing.

What is the difference between the ecoTEC pro and ecoTEC plus?

The ecoTEC pro is Vaillant’s simpler combi, aimed at smaller homes. The ecoTEC plus covers a wider range of sizes, includes system and regular versions as well as combis, and reaches higher hot water outputs at the top of the range.

How old is my Vaillant ecoTEC plus?

The installation date is usually on the Benchmark checklist in the manual or on your service records. An engineer can also date it from the serial number on the data badge. Older ecoTEC plus boilers look similar to the current range, so the model and serial number are the reliable guide.

How do I increase the water pressure on a Vaillant ecoTEC plus?

If the pressure gauge reads below about 1 bar when cold, you can usually top it up with the filling loop, following the steps in Vaillant’s user guide. If you need to top it up often, there is a leak or an expansion vessel problem that an engineer should find.

Which is better, the ecoTEC plus 832 or 836?

The 836 gives more hot water flow and a higher heating output, so it suits larger homes or those with an en suite. The 832 is ample for most one-bathroom homes. Your mains flow rate decides whether the 836 can actually deliver its extra hot water.

Rather have an engineer look at it?

Call the office, message us on WhatsApp or ask for a callback. We cover Hertfordshire, Bedfordshire and the surrounding areas.

Vaillant ecoTEC plus installation across Hertfordshire, Bedfordshire and Cambridgeshire

If you are considering an ecoTEC plus, we will survey your home, test your mains supply and recommend the right size, or tell you honestly if a different boiler suits you better. Our own Gas Safe registered engineers (registration 956889) work from our Stevenage base, and we are rated 4.9 on Google. See our Vaillant boiler installation page or call 01462 506374, answered 24 hours a day, 7 days a week.

Why choose Vantage

Rated 4.9 on Google from more than 700 reviews across Google, Checkatrade and Trustatrader. Qualified, accredited engineers, a fixed price before any work begins and a labour guarantee on every job, from an established local company with an office team you can actually reach. No job too small.

The Vantage Plumbing and Heating fleet of five fully stocked liveried vans

Gas Safe registered

Company registration 956889. Every gas engineer carries their own Gas Safe ID card, and you can ask to see it.

Refcom F-Gas certified

REF1024550. Legally required for air conditioning installation and servicing, and we hold it.

CHAS Elite accredited

Veriforce CHAS assessed for health and safety, which is why commercial clients and landlords use us.

City & Guilds and BPEC qualified

Qualified, insured engineers on every job. No subcontracted strangers.

700+ reviews, 4.9 on Google

Across Google, Checkatrade and Trustatrader. Read them before you book.

Labour guarantee on every job

12 months on repairs, installations and everything else. Two years on a full bathroom refit. If anything we did develops a fault, we come back and put it right.

Fixed price before we start

The price is agreed with you before any work begins. No hidden extras on the invoice.

24/7, answered by a person

The emergency line is answered every day of the year by someone who can send an engineer, not a call centre.

Fully stocked vans

Five vans carrying the parts that fail most often, so most jobs are fixed on the first visit.

An office team behind every job

An established local business with multiple engineers and a dedicated office team to keep you informed.

Vaillant myREWARDS and Ideal Max accredited

Accredited installer status means extended manufacturer warranties on the boilers we fit.

Emergency response within the hour

Our average response to an emergency call is under an hour across Hertfordshire, Bedfordshire and Cambridgeshire.

What our customers say

Speak to a local engineer

Vantage Plumbing and Heating covers Hertfordshire, Bedfordshire and the surrounding areas. Call and talk to an engineer, or send us the details and we will come back to you with a price.

Gas Safe registered, number 956889. Emergency line answered 24/7.

Quick check

Do we cover your postcode?

We work across Hertfordshire, Bedfordshire, Cambridgeshire, Milton Keynes and North, East and West London, including Hitchin, Stevenage, St Albans, Luton and Cambridge. Pop your postcode in and see straight away.

If we cover you, tell us what you need and how soon, and we will ring you back. Prefer to talk now? Call 01462 506 374, answered by a person 24/7.

✓ Yes, we cover you. Fill in the short form below and we will ring you back.
We might not cover your area yet. Send it anyway: fill in the short form below and we will ring you back and tell you honestly whether we can reach you.
Sorry, we do not work in South London. For anything else, ring 01462 506 374.