Skip to main content

Vantage Plumbing and Heating

What Is a Water Main and Who Is Responsible for It?

Hertfordshire, Bedfordshire & Cambridgeshire

Fully Stocked Vans12 Month Labour GuaranteeGas Safe Registered 956889

A water main is one of the large pipes your water company uses to carry drinking water around its network, usually laid under roads and pavements, and it belongs to and is maintained by the water company. Your home is connected to it by a smaller communication pipe that runs to your property boundary, and from there your own supply pipe carries water into the house, which is your responsibility as the owner.

In short

  • Water mains are the water company’s pipes under the street. The company owns and repairs them.
  • The communication pipe links the main to your boundary, usually ending at a stop tap in the pavement or front garden. That is also the company’s.
  • The supply pipe runs from the boundary into your home, up to your internal stop tap. That is yours, even the part under your garden.
  • A pipe shared by several homes is the joint responsibility of all the owners it serves.
  • Report a burst in the street to your water company. For a leak on your side, call a plumber, and ask your water company whether it offers help with supply pipe repairs.

What a water main actually is

Ofwat, the water regulator for England and Wales, describes water mains as large company pipes that distribute water around the network, often but not always laid under highways. Some are big trunk mains moving water between treatment works and reservoirs. Most of the ones you pass every day are smaller distribution mains running along each street, which the houses on that street connect to.

In everyday speech, people also say “mains water” or “the mains” to mean the cold water that comes into the house under pressure, as opposed to water fed from a tank in the loft. The kitchen cold tap is almost always on the mains. That is a different thing from the water main itself, but it is fed by it.

The pipes between the main and your taps

Understanding the three sections of pipe is the key to knowing who pays for what.

SectionWhere it runsWho owns and repairs it
Water mainUnder the road or pavement, serving the streetThe water company
Communication pipeFrom the main to your boundary, usually ending at the company stop tap or meterThe water company
Supply pipeFrom the boundary, under your garden or drive, into your home up to the internal stop tapYou, the property owner
Internal plumbingEverything inside from the internal stop tap: pipes, tanks, taps, boilerYou, the property owner

Ofwat’s guidance is that if a company stop tap has been fitted, it normally marks the end of the water company’s pipework. If there is no boundary stop tap, you are still responsible for the supply pipe from where it enters your property. There can be special cases in some areas, so if you are unsure, your water company and your property deeds are the places to check.

Flats, terraces and older estates often have shared supply pipes, where one pipe feeds several homes before splitting off. Ofwat says a shared supply pipe is the joint responsibility of all the property owners it serves, wherever it runs.

Where your stop taps are

Every home should have two stop taps, and it is worth knowing where both are before you need them.

  • The boundary stop tap. Usually under a small metal or plastic cover in the pavement or just inside your front boundary, sometimes with a water meter. It belongs to the water company and often needs a special key to turn.
  • The internal stop tap. Where the supply pipe comes into the house, very often under the kitchen sink, but sometimes in a downstairs toilet, under the stairs, in a garage or under the floor near the front door. The water regulations require a stop valve on the supply to every property, so you can shut off your own water without affecting the neighbours.

If you have a leak inside the house, the internal stop tap is the one to turn off. Turn it clockwise until it stops. If it has not been turned for years, move it gently, as old stop taps can seize or start to leak at the spindle. A stiff or leaking stop tap is a quick fix as part of our general plumbing repairs.

How deep is a water supply pipe?

The Water Supply (Water Fittings) Regulations 1999 require new pipes laid underground to be at least 750 mm deep and no more than 1,350 mm deep, unless they are in a duct. The lower limit keeps the pipe below frost depth, and the upper limit keeps it reachable for repairs. Older supply pipes do not always meet this, which is one reason some freeze or get damaged by building work.

Some older homes still have a lead supply pipe. If yours is lead, it is worth asking your water company for advice and whether it offers any help with replacing it.

Water pressure: what the water company has to supply

Ofwat has set a minimum pressure that water companies should maintain in the communication pipe: seven metres static head, which is 0.7 bar. That standard applies to the company’s pipe, not to your supply pipe or your plumbing. So if the street pressure is fine but your pressure is poor, the problem is often a narrow or partly blocked supply pipe, a stop tap not fully open, or a leak on your side. Our guide to low water pressure in the whole house explains how a plumber tracks it down.

Signs of a leak, and whose it is

A leak on the water main or communication pipe is usually obvious in the street: water bubbling up through the road or pavement, a sunken patch, or several houses losing pressure at once. A leak on your own supply pipe is often quieter.

Signs of a leak on your supply pipe:

  • A wet or unusually green patch in the garden or drive that never dries out, even in dry weather.
  • Water appearing near the front wall, or damp at the base of a wall where the pipe enters.
  • A drop in pressure or flow in your home only.
  • A water meter that keeps moving when every tap and appliance in the house is off.
  • A water bill that has jumped with no change in how you use water.

To check with a meter, turn off every tap and appliance that uses water, make sure the toilets have finished filling, note the reading and look again after about 30 minutes without using any water. If it has moved, water is escaping somewhere past the meter.

What to do if you think there is a leak

  1. If water is coming up in the road or pavement, report it to your water company. Much of Hertfordshire is supplied by Affinity Water, and your bill names your company and its leak line.
  2. If water is leaking inside your home, turn off the internal stop tap, switch off electrics near the leak if it is safe to do so, and call a plumber. Our emergency plumbing team answers 24 hours a day.
  3. If you suspect a leak on your supply pipe outside, do the meter test above, then get it located. Our leak detection service aims to pinpoint the leak so only a small area needs opening up. Our guide to leak detection technology explains the methods plumbers use.
  4. Ask your water company about help. Ofwat says each company must have a code of practice for supply pipe leaks, and many offer free or subsidised repairs in some cases. Affinity Water, for example, runs a discretionary leak repair scheme for household customers, but says it will not repair a supply pipe in poor condition and will recommend replacement instead.
  5. Ask about a leakage allowance. If you are metered and you fix a leak promptly, your water company may credit you for the water lost, subject to its own rules.

Who pays for what: common situations

SituationUsually whose responsibility
Burst pipe in the road outsideThe water company
Leak at the boundary stop tapThe water company
Leak under your front gardenYou, though ask the water company about help
Leak under a shared driveway feeding three housesAll the owners served by that pipe, jointly
Leak under the kitchen floorYou
Low pressure across the whole streetThe water company
Low pressure only in your houseUsually your supply pipe or plumbing

What it costs with Vantage

In normal working hours there is no call-out fee. After the first hour, time is charged in half-hour steps, and parts are quoted before we fit them. Evening, weekend and overnight visits are charged at the out-of-hours rates. Every rate is published on our prices page, so you know what you will pay before we arrive. For a larger job, such as replacing a supply pipe, we quote a fixed price after we have seen it.

Trusted & Accredited Professionals
Checkatrade approved trader
City and Guilds qualified engineers
BPEC certified engineers
Gas Safe registered engineers
Elite CHAS accreditation
London and South East England Prestige Awards 2022 winner
Veriforce CHAS accredited contractor

Frequently asked questions

Who is responsible for the water main outside my house?

The water company. Mains and the communication pipe that connects your property to the main, up to your boundary or the company stop tap, are owned and maintained by your water company.

Am I responsible for the water pipe under my garden?

Yes, in most cases. The supply pipe from your boundary to your internal stop tap belongs to you, even though it is buried. If it serves more than one property, the responsibility is shared between the owners.

What is the difference between a water main and a supply pipe?

A water main is a large company pipe serving a whole street or area. A supply pipe is the smaller private pipe that carries water from your boundary into one property.

How do I know if the leak is on my side or the water company’s?

If water is appearing in the road or pavement, or several neighbours are affected, it is probably the company’s. If the leak is inside your boundary, only your home is affected, or your meter keeps turning with everything off, it is probably your supply pipe.

Can a plumber work on the water main?

No. The main and communication pipe belong to the water company, and only the company or its contractors work on them. A plumber can repair or replace your supply pipe and everything inside your home.

Help with supply pipe leaks and plumbing in Hertfordshire

If you have a leak, low pressure or a stop tap that will not turn on your side of the boundary, our own plumbers can find and fix it. We cover Hertfordshire, Bedfordshire and Cambridgeshire from our Stevenage base with fully stocked vans, and we are rated 4.9 on Google. See our general plumbing repairs service or call 01462 506374. The phone is answered 24 hours a day, 7 days a week.

Rather have an engineer look at it?

Call the office, message us on WhatsApp or ask for a callback. We cover Hertfordshire, Bedfordshire and the surrounding areas.

Why choose Vantage

Rated 4.9 on Google from more than 700 reviews across Google, Checkatrade and Trustatrader. Qualified, accredited engineers, a fixed price before any work begins and a labour guarantee on every job, from an established local company with an office team you can actually reach. No job too small.

The Vantage Plumbing and Heating fleet of five fully stocked liveried vans

Gas Safe registered

Company registration 956889. Every gas engineer carries their own Gas Safe ID card, and you can ask to see it.

Refcom F-Gas certified

REF1024550. Legally required for air conditioning installation and servicing, and we hold it.

CHAS Elite accredited

Veriforce CHAS assessed for health and safety, which is why commercial clients and landlords use us.

City & Guilds and BPEC qualified

Qualified, insured engineers on every job. No subcontracted strangers.

700+ reviews, 4.9 on Google

Across Google, Checkatrade and Trustatrader. Read them before you book.

Labour guarantee on every job

12 months on repairs, installations and everything else. Two years on a full bathroom refit. If anything we did develops a fault, we come back and put it right.

Fixed price before we start

The price is agreed with you before any work begins. No hidden extras on the invoice.

24/7, answered by a person

The emergency line is answered every day of the year by someone who can send an engineer, not a call centre.

Fully stocked vans

Five vans carrying the parts that fail most often, so most jobs are fixed on the first visit.

An office team behind every job

An established local business with multiple engineers and a dedicated office team to keep you informed.

Vaillant myREWARDS and Ideal Max accredited

Accredited installer status means extended manufacturer warranties on the boilers we fit.

Emergency response within the hour

Our average response to an emergency call is under an hour across Hertfordshire, Bedfordshire and Cambridgeshire.

What our customers say

Speak to a local engineer

Vantage Plumbing and Heating covers Hertfordshire, Bedfordshire and the surrounding areas. Call and talk to an engineer, or send us the details and we will come back to you with a price.

Gas Safe registered, number 956889. Emergency line answered 24/7.

Quick check

Do we cover your postcode?

We work across Hertfordshire, Bedfordshire, Cambridgeshire, Milton Keynes and North, East and West London, including Hitchin, Stevenage, St Albans, Luton and Cambridge. Pop your postcode in and see straight away.

If we cover you, tell us what you need and how soon, and we will ring you back. Prefer to talk now? Call 01462 506 374, answered by a person 24/7.

✓ Yes, we cover you. Fill in the short form below and we will ring you back.
We might not cover your area yet. Send it anyway: fill in the short form below and we will ring you back and tell you honestly whether we can reach you.
Sorry, we do not work in South London. For anything else, ring 01462 506 374.